| Machine type G4/800 MP
| PPC 7450
I have cvs checkout today and build kernel:
NetBSD 1.6B (GENERIC) #0: Fri Jun 21 21:57:55 JST 2002

The kernel works upto single user level.

It hungs at 'Setting tty flags.' at the first time.

....
root on wd0a dumps on wd0b
root file system type: ffs
Fri Jun 21 13:21:47 GMT 2002
swapctl: adding /dev/wd0b as swap device at priority 0
starting file system checks:
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
Setting tty flags.
 _
(and hungs)
... 
once more the same thing.. it works..
But shortly unable to type in from the console. Also rsh
shell freezes..

dmesg follows:

NetBSD 1.6B (GENERIC) #0: Fri Jun 21 21:57:55 JST 2002
    makoto@u:/export/20020621/syssrc/sys/arch/macppc/compile/GENERIC
total memory = 256 MB
avail memory = 225 MB
using 2048 buffers containing 13208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 7450 (Revision 2.1), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: 800.00 MHz
cpu0: 256KB L2 cache, 2MB L3 backside cache
cpu1 at mainbus0: ID 1
cpu1: processor off-line; multiprocessor support not present in kernel
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
Apple Computer UniNorth AGP Interface (host bridge) at pci0 dev 11 function 0 not configured
ofb0 at pci0 dev 16 function 0: Nvidia Corporation GeForce2 MX [NV11]
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
Apple Computer UniNorth Host-PCI Bridge (host bridge) at pci1 dev 11 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout. command = 0x0
0 targets
aed0 at adb0 addr 0: ADB Event device
apm0 at adb0: battery flags 0x1, 0% charged
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <WDC WD800BB-40BSA0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
ata4 conf[0] = 0xc519465, cyc = 2 (30 ns), act = 6 (90 ns), inact = 3
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW  DVR-103, , 1.49> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
conf[0] = 0x11823, cyc = 4 (120 ns), act = 3 (75 ns), inact = 1
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
Apple Computer UniNorth Host-PCI Bridge (host bridge) at pci2 dev 11 function 0 not configured
fwohci0 at pci2 dev 14 function 0: Lucent Technologies product 0x5811 (rev. 0x00)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.0, 00:03:93:ff:fe:3e:a3:78, 400Mb/s, 2048 max_rec, 8 iso_ctx
gm0 at pci2 dev 15 function 0: Ethernet address 00:03:93:3e:a3:78
gm0: interrupting at irq 41
brgphy0 at gm0 phy 0: BCM5411 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
fw0 at fwohci0: 00:03:93:ff:fe:3e:a3:78:0a:02:20:00:00:00:00:00
uhub2 at uhub1 port 1
uhub2: Mitsumi Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.11, addr 2
uhub2: 3 ports with 2 removable, bus powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 0
uhidev1: Logitech M4848, rev 1.00/5.02, addr 4, iclass 3/1
ums0 at uhidev1: 1 button
wsmouse1 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ttyp0:makoto@quick  22:29:52/020621(~)> 

---
Makoto Fujiwara, 
I will be ip-unreachable for several days...