Subject: Re: removing consinit() from machdep.c
To: None <port-macppc@netbsd.org>
From: Makoto Fujiwara <makoto@ki.nu>
List: port-macppc
Date: 06/17/2002 14:42:19
mef> It looks to me, removing consinit() line from machdep.c
mef> will boot 1.6_BETA2 on StarMax 3000/240 with kbd/screen

I have confirmed above statement with
NetBSD-daily/200206170000/sources/sets/syssrc.tgz
minus consinit() line.

                   (..clock is out of time.)
ttyp0:makoto@harry  11:55:26/020617(~)> dmesg
NetBSD 1.6_BETA2 (GENERIC) #0: Mon Jun 17 14:34:44 JST 2002
    makoto@quick:/export/20020616/usr/src/sys/arch/macppc/compile/GENERIC
total memory = 112 MB
avail memory = 99544 KB
using 1459 buffers containing 5836 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>
cpu0: ohare L2 cache enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
rtk0 at pci0 dev 13 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 23
rtk0: Ethernet address 00:90:cc:2e:a7:57
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <ST52520A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 2446 MB, 4970 cyl, 16 head, 63 sec, 512 bytes/sect x 5009760 sectors
wd0: drive supports PIO mode 4, DMA mode 2
conf[0] = 0x11823, cyc = 4 (120 ns), act = 3 (75 ns), inact = 1
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc1 at obio0 offset 0x21000 irq 14: DMA transfer
adb0 at obio0 offset 0x16000 irq 18: 4 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 15: extended keyboard
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 14: 1-button, 100 dpi mouse
wsmouse0 at ams0 mux 0
akbd1 at adb0 addr 2: keyboard II (Japanese layout)
wskbd at akbd1 not configured
ams1 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse at ams1 not configured
ofb0 at pci0 dev 17 function 0: ATI Technologies Mach64 VT
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 20 function 0: Digital Equipment DECchip 21052 PCI-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 6 lun 0: <QUANTUM, LP40S  940409404, 3.3> SCSI2 0/direct fixed
sd0: 41046 KB, 928 cyl, 2 head, 44 sec, 512 bytes/sect x 82092 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ttyp0:makoto@harry  11:55:29/020617(~)> 

---
Makoto Fujiwara,