On Mon, Jun 10, 2002 at 10:31:54AM +0900, Makoto Fujiwara wrote:
> Thanks Maechal,
> 
> With PowerBook G4, 
> Sales order# M8362J/A
> with Gigabit Ethernet, 550MHz version, (2001/11 or arround version)
> Open Firmware 3,3 4.2.6f1 BootROM built on 09/11/01 at 16:01:17
> 
> with daily snapshot of:
>   ftp://releng.netbsd.org/pub/NetBSD-daily/200206090000/macppc/
> 
> boot hd:14,ofwboot.xcf hd:14/netbsd.GENERIC_MD.gz
> ..
> panic: lockmgr: pid 0, not exclusive lock holder 1008730331 unlocking
> Stopped in pid () at   0x0a0f338:	lwz r0,r1, 0x14
> db> (unable to type in)

Mine worked fine. Same machine. It has an Apple Pro mouse plugged in
at boot. This machine also has the same era Apple branded Airport card
as well as my 667.

I tried this on 733 towers and I got panics. Much the same as Makoto's
above. They follow the dmesg.

NetBSD 1.6_BETA1 (GENERIC_MD) #0: Thu Jun  6 20:16:22 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/macppc/OBJ/autobuild/src/sys/arch/macppc/compile/GENERIC_MD
total memory = 512 MB
avail memory = 460 MB
using 2048 buffers containing 26316 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 7450 (Revision 2.1), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: 550.00 MHz
cpu0: 256KB L2 cache
: unknown size backside cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
Apple Computer UniNorth AGP Interface (host bridge) at pci0 dev 11 function 0 not configured
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x4c59
ofb0: 1152 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
Apple Computer UniNorth Host-PCI Bridge (host bridge) at pci1 dev 11 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume button
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <IBM-IC25N020ATDA04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
ata4 conf[0] = 0xc519465, cyc = 2 (30 ns), act = 6 (90 ns), inact = 3
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8187, , HA18> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
conf[0] = 0x11823, cyc = 4 (120 ns), act = 3 (75 ns), inact = 1
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
wi0 at obio0 offset 0x30000 irq 57: 802.11 address 00:30:65:03:09:68
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.12.1)
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
cbb0: interrupting at irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
Apple Computer UniNorth Host-PCI Bridge (host bridge) at pci2 dev 11 function 0 not configured
fwohci0 at pci2 dev 14 function 0: Lucent Technologies product 0x5811 (rev. 0x00)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.0, 00:03:93:ff:fe:45:1c:a6, 400Mb/s, 2048 max_rec, 8 iso_ctx
gm0 at pci2 dev 15 function 0: Ethernet address 00:03:93:45:1c:a6
gm0: interrupting at irq 41
ukphy0 at gm0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x0006, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
md0: internal 2048 KB image area
fw0 at fwohci0: 00:03:93:ff:fe:45:1c:a6:0a:02:20:00:00:00:00:00
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Fujitsu Takamisawa Component Apple Optical USB Mouse, rev 1.10/1.05, addr 2, iclass 3/1
ums0 at uhidev0: 1 button
wsmouse1 at ums0 mux 0
boot device: wd0
root on md0a dumps on md0b
WARNING: clock gained 3 days -- CHECK AND RESET THE DATE!
root file system type: ffs

733 towers gave me one of two errors:

panic: lockmgr: pid 0, not exclusive lock holder 1008730331 unlocking
Stopped in pid 0 () at 0xa0f338:    lwz    r0, r1, 0x14
db>

or

trap type 200 at a0ff8c
Press a key to panic.
panic: trap

I'll try some 933's and a new iMac or two in the coming days. Maybe an
ibook if you're lucky :)

HTH,
  C.
-- 
 charlie@eatyourpets.com
 http://eatyourpets.com/~yeled/pgp.txt
 FC8B 8727 8E82 5242 358C  8FC0 AA26 43C2 14AA 7941