--=-OJQth0c+n72yQE2qhkT8
Content-Type: multipart/mixed; boundary="=-g+VnMePr/Bx8tbS4Mdv2"


--=-g+VnMePr/Bx8tbS4Mdv2
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

Hi,

The background:

I'm running NetBSD 1.5.2 on my PowerMac 8600/300.  I recently bought a
Promise Ultra100 TX2 ATA controller so I could hook up some ATA drives
to the system (not to boot from, just for some extra storage).  I
discovered that there's no support for these in 1.5.2, so I tried the
1.5ZC snapshot that was just uploaded.

The problem:

When I boot the install kernel it hangs right after it finds the disk
I've got hooked up to the controller.  Removing the disk makes it hang
just after it finds the controller.

Is anyone else using a Promise card on a NetBSD/macppc system?  Does
anyone have any suggestions of how I could track this problem down?

I've attached a copy of the dmesg of the failed kernel, and one of it
under the older 1.5.2 kernel.

--=20
Benno Rice
benno@jeamland.net

--=-g+VnMePr/Bx8tbS4Mdv2
Content-Disposition: attachment; filename=dmesg-1.5zc.txt
Content-Type: text/plain; name=dmesg-1.5zc.txt; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

0 > boot scsi-int/sd@0:0 netbsd.INSTALL.gz=20
>> NetBSD/macppc OpenFirmware Boot, Revision 1.2
>> (matt@duel.local, Sat Aug 18 13:46:09 PDT 2001)
no active package3745592+129016=3D0x3b21a4
 start=3D0x800000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.=20
Copyright (c) 1982, 1986, 1989, 1991, 1993          =20
    The Regents of the University of California.  All rights reserved.
                                                                     =20
NetBSD 1.5ZC (INSTALL) #0: Tue Apr  9 10:46:28 JST 2002
    tsutsui@lancer:/u/src/sys/arch/macppc/compile/INSTALL
total memory =3D 128 MB                                   =20
avail memory =3D 112 MB
using 1664 buffers containing 6656 KB of memory
no active packagemainbus0 (root)              =20
cpu0 at mainbus0: Version a (Revision 1.0), ID 0 (primary)
cpu0: HID0 8000c086<EMCP,ICE,DCE,SGE,BHT,NOPDST>         =20
bandit0 at mainbus0                            =20
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0     =20
pchb0: vendor 0x106b product 0x0001 (rev. 0x03)
fxp0 at pci0 dev 13 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 23                         =20
fxp0: Ethernet address 00:d0:b7:49:83:d5                =20
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci0 dev 14 function 0: Promise Ultra100TX2/ATA Bus Master IDE A=
ccelerator (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using irq 24 for native-PCI interrupt       =20
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CR8.4A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)   =20

--=-g+VnMePr/Bx8tbS4Mdv2
Content-Disposition: attachment; filename=dmesg-1.5.2.txt
Content-Type: text/plain; name=dmesg-1.5.2.txt; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

NetBSD 1.5.2 (TURN) #2: Sat Mar 30 14:53:14 EST 2002
    benno@turn.jeamland.net:/usr/src/sys/arch/macppc/compile/TURN
CPU: Version a (Revision 100)
total memory =3D 128 MB
avail memory =3D 114 MB
using 1664 buffers containing 6656 KB of memory
mainbus0 (root)
cpu0 at mainbus0bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
fxp0 at pci0 dev 13 function 0: Intel i82557 Ethernet, rev 8
fxp0: interrupting at irq 23
fxp0: Ethernet address 00:d0:b7:49:83:d5, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Promise Technology product 0x4d68 (miscellaneous mass storage, interface 0x=
85, revision 0x02) at pci0 dev 14 function 0 not configured
Texas Instruments TSB12LV21 IEEE 1394 Host Controller (Firewire serial bus,=
 revision 0x02) at pci0 dev 15 function 0 not configured
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:05:02:ee:38:28
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 1 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
sixty6 at obio0 offset 0x1c000 not configured
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
ofb0 at pci1 dev 11 function 0: Apple Computer Control
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0
Apple Computer PlanB (undefined subclass 0x00, revision 0x01) at pci1 dev 1=
3 function 0 not configured
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <QUANTUM, FIREBALL ST4300S, 0F0D> SCSI2 0/d=
irect fixed
sd0: 4110 MB, 7068 cyl, 6 head, 198 sec, 512 bytes/sect x 8418816 sectors
cd0 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM CR-8024, 2.0e> SCSI2 5/cd=
rom removable
sd1 at scsibus1 target 5 lun 0: <IOMEGA, ZIP 100, E.08> SCSI2 0/direct remo=
vable
sd1: drive offline
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.9 initialized.  Default =3D pass all, Logging =3D enabled

--=-g+VnMePr/Bx8tbS4Mdv2--

--=-OJQth0c+n72yQE2qhkT8
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: For info see http://www.gnupg.org

iEYEABECAAYFAjy1cR8ACgkQXjRwWofFmQlhJQCeKaqK2B3+e4mR8B64cy+dga9T
VpYAn1XW8K6WtmoG2U7yR8PfElyLc6Oh
=zrEd
-----END PGP SIGNATURE-----

--=-OJQth0c+n72yQE2qhkT8--