Hi,

  I recently tried to install XFree on my PB 1999
(WallStreet) with ATI Rage LP Pro with 4M of video
ram. I tied with both the stable and the -current
kernels and with both XFree 4.0.1 and XFree 4.2
(I used the precompile versions I fount in the
NetBSD site). In both case XFree was not able
to found my video card and failed the startup.
Notice that, in a first time, it found my card.
I do not undertand what happens.
 It follows the log for the 4.0.1 (The log for
the 4.2 is quite different, but the result the
same). I tried also to specify the video ram size,
the PCI slot (0:17:0) and to use both the "ati"
and the "mach64" options, but the result is alwais
the same.
 I spent a lot of time to install NetBSD and I
absolutely need a UNIX version on my mac. For
various reasons I prefere BSD to Linux, but I
am not able to use my external kensington mouse
with Xmacppc and I can not use XFree. It is too
bad. Plese, help me.
 Thank you very much in advace for everyone,
   best regards,

                       Marco
-----


XFree86 Version 4.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 1 July 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/macppc 1.5 [ELF] The NetBSD Foundation, Inc.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb  5 15:32:29 2002
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen1" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Mach64"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "Protocol" "wskbd"
(**) Option "Device" "/dev/wskbd0"
(**) Keyboard: Protocol: wskbd
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macadb"
(**) XKB: model: "macadb"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) Option "PciType" "Grackle"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(--) Using wscons driver (/dev/ttyE0)
(**) PCI-HOST bridge is Grackle
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1057,0002 card 0000,0000 rev 40 class 06,00,00 hdr
00
(II) PCI: 00:0d:0: chip 106b,0017 card 0000,0000 rev 00 class ff,00,00 hdr
00
(II) PCI: 00:10:0: chip 106b,0017 card 0000,0000 rev 00 class ff,00,00 hdr
00
(II) PCI: 00:11:0: chip 1002,4c50 card 0000,0000 rev dc class 03,00,00 hdr
00
(II) PCI: 00:13:0: chip 104c,ac15 card fffc,ffff rev 01 class 06,07,00 hdr
82
(II) PCI: 00:13:1: chip 104c,ac15 card fffc,ffff rev 01 class 06,07,00 hdr
82
(II) PCI: End of PCI scan
(--) PCI: (0:17:0) ATI Mach64 LP rev 220, Mem @ 0x82000000/24, I/O @
0x0400/8
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MXB
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IXB
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
	[0] -1	0xf3000000 - 0xf3ffffff (0x1000000) MXBE
	[1] -1	0xf4000000 - 0xf7ffffff (0x4000000) MXBE
	[2] -1	0x82000000 - 0x82ffffff (0x1000000) MXB(B)
	[3] -1	0x00000400 - 0x000004ff (0x100) IXB(B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xf3000000 - 0xf3ffffff (0x1000000) MXBE
	[1] -1	0xf4000000 - 0xf7ffffff (0x4000000) MXBE
	[2] -1	0x82000000 - 0x82ffffff (0x1000000) MXB(B)
	[3] -1	0x00000400 - 0x000004ff (0x100) IXB(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
	[0] -1	0xf3000000 - 0xf3ffffff (0x1000000) MXBE
	[1] -1	0xf4000000 - 0xf7ffffff (0x4000000) MXBE
	[2] -1	0x82000000 - 0x82ffffff (0x1000000) MXB(B)
	[3] -1	0x00000400 - 0x000004ff (0x100) IXB(B)
(II) ATI: ATI driver (version 5.3.5) for chipsets: ati, ativga
(II) r128: Driver for ATI Rage 128 chipset: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL
(AGP),
	ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
	ATI Rage 128 Mobility LF (AGP)
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
	ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
	ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag200, mgag200 PCI, mgag400
(II) FBDev: driver for framebuffer: fbdev, afb
inw(0x42e8) at line 352 in atiprobe.c
outw(0x42e8, 0x9000) at line 356 in atiprobe.c
outw(0x42e8, 0x500f) at line 358 in atiprobe.c
inw(0x92e8) at line 361 in atiprobe.c
outw(0x92e8, 0x5a5a) at line 362 in atiprobe.c
inw(0x9ae8) at line 363 in atiprobe.c
inw(0x92e8) at line 364 in atiprobe.c
outw(0x92e8, 0x0) at line 375 in atiprobe.c
outw(0x42e8, 0x0) at line 380 in atiprobe.c
ATIMach64Probe IOBase = 2ec, type 0
ATIMach64Probe IOBase = 1cc, type 0
ATIMach64Probe IOBase = 1c8, type 0
ATIMach64Probe IOBase = 400, type 1
inl(0x4a0) at line 500 in atiprobe.c
outl(0x4a0, 0x800000) at line 507 in atiprobe.c
inl(0x4d0) at line 510 in atiprobe.c
outl(0x4d0, 0x100) at line 513 in atiprobe.c
outl(0x4d0, 0x0) at line 514 in atiprobe.c
outl(0x4d0, 0x100) at line 515 in atiprobe.c
inl(0x480) at line 519 in atiprobe.c
outl(0x480, 0x55555555) at line 522 in atiprobe.c
inl(0x480) at line 523 in atiprobe.c
outl(0x480, 0x0) at line 542 in atiprobe.c
outl(0x4d0, 0x0) at line 547 in atiprobe.c
outl(0x4a0, 0x0) at line 548 in atiprobe.c
ATIMach64Probe IOBase = 400, type 1
inl(0x4a0) at line 500 in atiprobe.c
outl(0x4a0, 0x800000) at line 507 in atiprobe.c
inl(0x4d0) at line 510 in atiprobe.c
outl(0x4d0, 0x100) at line 513 in atiprobe.c
outl(0x4d0, 0x0) at line 514 in atiprobe.c
outl(0x4d0, 0x100) at line 515 in atiprobe.c
inl(0x480) at line 519 in atiprobe.c
outl(0x480, 0x55555555) at line 522 in atiprobe.c
inl(0x480) at line 523 in atiprobe.c
outl(0x480, 0x0) at line 542 in atiprobe.c
outl(0x4d0, 0x0) at line 547 in atiprobe.c
outl(0x4a0, 0x0) at line 548 in atiprobe.c
(WW) ATI:  PCI Mach64 in slot 0:17:0 could not be detected!
 See README.ati for details.
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".