I have a similar problem with a PM 4400. I did download the 4.0.1 sources
from www.xfree.org (the first of the three packages is sufficient). Then I
applied the patches from ftp://nandra.iri.co.jp/pub/NetBSD/macppc/XFree86/
and went to bed. It compiled without any hitches but unluckily didn=B4t wor=
k
either. Maybe you are luckier. I will try the very latest patch from
today.=20

I would appreciate if somebody could tell me why my Voodoo3 isn=B4t
recognized as a Voodoo3 and what went wrong with the ATI probe.

Torsten


XFree86 Version 4.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 1 July 2000
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/macppc 1.5.2 [ELF] The NetBSD Foundation, Inc.
(=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 20 06:06:21 2002
(=3D=3D) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(=3D=3D) ServerLayout "Main Layout"
(**) |-->Screen "Screen2" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Mach64"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "Protocol" "wskbd"
(**) Option "Device" "/dev/wskbd0"
(**) Keyboard: Protocol: wskbd
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macadb"
(**) XKB: model: "macadb"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/m
isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100d=
pi/:u
nscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/=
X11R6
/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/f=
onts/
100dpi/"
(=3D=3D) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) Option "PciType" "Bandit"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(--) Using wscons driver (/dev/ttyE0)
(**) PCI-HOST bridge is Bandit
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0001 card 0000,0000 rev 03 class 06,00,00 hdr
00
(II) PCI: 00:0d:0: chip 121a,0005 card 121a,0005 rev 01 class 03,00,00 hdr
00
(II) PCI: 00:0f:0: chip 1011,0014 card 0000,0000 rev 11 class 02,00,00 hdr
00
(II) PCI: 00:10:0: chip 106b,0007 card 0000,0000 rev 01 class ff,00,00 hdr
00
(II) PCI: 00:11:0: chip 1002,5654 card 0000,0000 rev 40 class 03,00,00 hdr
00
(II) PCI: End of PCI scan
(--) PCI: (0:13:0) 3Dfx Interactive unknown chipset (0x0005) rev 1, Mem @
0x8200
0000/25, 0x90000000/25, I/O @ 0x0400/8
(--) PCI: (0:17:0) ATI Mach64 VT rev 64, Mem @ 0x81000000/24, I/O @
0x0400/8
(II) Addressable bus resource ranges are
        [0] -1  0x00000000 - 0xffffffff (0x0) MXB
        [1] -1  0x00000000 - 0x0000ffff (0x10000) IXB
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
        [0] -1  0xf3000000 - 0xf3ffffff (0x1000000) MXBE
        [1] -1  0x80840000 - 0x8087ffff (0x40000) MXBE
        [2] -1  0x80800000 - 0x80ffffff (0x800000) MXBE
        [3] -1  0x81000000 - 0x81ffffff (0x1000000) MXB(B)
        [4] -1  0x80810000 - 0x8081ffff (0x10000) MXB(B)
        [5] -1  0x90000000 - 0x91ffffff (0x2000000) MXB(B)
        [6] -1  0x82000000 - 0x83ffffff (0x2000000) MXB(B)
        [7] -1  0x00000800 - 0x000008ff (0x100) IXBE
        [8] -1  0x00000400 - 0x000004ff (0x100) IXB(B)
        [9] -1  0x00000400 - 0x000004ff (0x100) IXB(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
        [0] -1  0xf3000000 - 0xf3ffffff (0x1000000) MXBE
        [1] -1  0x80840000 - 0x8087ffff (0x40000) MXBE
        [2] -1  0x80800000 - 0x8080ffff (0x10000) MXBE
        [3] -1  0x81000000 - 0x81ffffff (0x1000000) MXB(B)
        [4] -1  0x80810000 - 0x8081ffff (0x10000) MXB(B)
        [5] -1  0x90000000 - 0x91ffffff (0x2000000) MXB(B)
        [6] -1  0x82000000 - 0x83ffffff (0x2000000) MXB(B)
        [7] -1  0x00000800 - 0x000008ff (0x100) IXBE
        [8] -1  0x00000400 - 0x000004ff (0x100) IXB(B)
        [9] -1  0x00000400 - 0x000004ff (0x100) IXB(B)
(II) ATI: ATI driver (version 5.3.5) for chipsets: ati, ativga
(II) r128: Driver for ATI Rage 128 chipset: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL
(AGP),
        ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
        ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
        ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 7500 QW (AGP)
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
        ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
        ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
        mga2164w AGP, mgag100, mgag200, mgag200 PCI, mgag400
(II) FBDev: driver for framebuffer: fbdev, afb
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
        3dfx Voodoo3, 3dfx Voodoo5
inw(0x42e8) at line 352 in atiprobe.c
outw(0x42e8, 0x9000) at line 356 in atiprobe.c
outw(0x42e8, 0x500f) at line 358 in atiprobe.c
inw(0x92e8) at line 361 in atiprobe.c
outw(0x92e8, 0x5a5a) at line 362 in atiprobe.c
inw(0x9ae8) at line 363 in atiprobe.c
inw(0x92e8) at line 364 in atiprobe.c
outw(0x92e8, 0x0) at line 375 in atiprobe.c
outw(0x42e8, 0x0) at line 380 in atiprobe.c
ATIMach64Probe IOBase =3D 2ec, type 0
ATIMach64Probe IOBase =3D 1cc, type 0
ATIMach64Probe IOBase =3D 1c8, type 0
ATIMach64Probe IOBase =3D 400, type 1

Fatal server error:
Caught signal 11.  Server aborting


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".