Subject: Re: Umax E100 card
To: Cookie Monster <cookiethemonster@attbi.com>
From: Manuel Bouyer <bouyer@antioche.eu.org>
List: port-macppc
Date: 01/17/2002 21:59:25
On Wed, Jan 16, 2002 at 09:07:46PM -0600, Cookie Monster wrote:
> Hello, I have a Umax S900 which is running NetBSD 1.5.1. There is no
> other OS on the system right now. I got a Umax E100 card for it a while
> back, and have not been able to get it to work with netbsd. The only pci
> cards in the system are the stock IMS graphics card and the E100. The
> E100 is in the second pci slot from the top, and the IMS is in the 4th
> slot. Here is the pertinent dmesg output from the 1.5.1 kernel:
> 
> Q Logic ISP1020 (SCSI mass storage, revision 0x02) at pci0 dev 14
> function 0 not configured
> 
> And here is the output from a 1.5Y generic kernel I tried also:
> 
> isp0 at pci0 dev 14 function 0
> isp0: interrupting at irq 24
> isp0: Ram Checksum Failure
> 
> The system has a 180MHz 604e processor and 3 scsi devices total. There
> is a HD which netbsd is on, and a CD-ROM, both of which are connected to
> the onboard internal scsi bus, and function properly. Then there is a HD
> which is connected to the E100 card. And those are all the scsi devices
> connected to the system. So my question is, has anyone gotten this card
> to work as a scsi adapter? Is there any way to get it working? Any
> assistance is appreciated.

Do you have another PCI NetBSD machine in which you could try the
card ? 

-- 
Manuel Bouyer <bouyer@antioche.eu.org>
--