Hi, 
Just installed 1.5.2 on my Starmax 4000/200 and having pproblems with
the network.
What did I forget ?

The Network card shows up during boot, "ifconfig" sees it, but a simple
ping hangs forewer>>>:

>> NetBSD/macppc OpenFirmware Boot, Revision 1.2
>> (matt@duel.local, Sat Aug 18 13:46:09 PDT 2001)
no active package2931820+237444 [100+106512+89888]=0x335e10
 start=0x100000
[ preserving 197152 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.2 (GENERIC) #10: Sat Aug 18 14:29:39 PDT 2001
    matt@duel.local:/u1/kobj/GENERIC
CPU: 604ev (Revision 204)
total memory = 32768 KB
avail memory = 25504 KB
using 435 buffers containing 1740 KB of memory

[.. cuts ..]

rtk0 at pci0 dev 14 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 24
rtk0: Ethernet address 00:50:bf:70:68:c5
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

[.. cuts ..]

Starting network.
Hostname: starmax1
IPv6 mode: host
Configuring network interfaces: rtk0.
Adding interface aliases:
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Updating motd.
starting local daemons:.
Starting inetd.
Starting cron.
Wed Sep 12 08:13:27 PDT 1956

NetBSD/macppc (starmax1) (tty00)

login: Sep 12 08:13:29 starmax1 getty[183]: /dev/ttyE0: Device not
configured

NetBSD/macppc (starmax1) (tty00)

login: root
Last login: Wed Sep 12 07:57:16 1956 on tty00
Sep 12 08:17:00 starmax1 login: ROOT LOGIN (root) ON tty00
Sep 12 08:17:00 starmax1 login: ROOT LOGIN (root) ON tty00
Copyright (c) 1996, 1997, 1998, 1999, 2000
        The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights
reserved.

NetBSD 1.5.2 (GENERIC) #10: Sat Aug 18 14:29:39 PDT 2001

Welcome to NetBSD!

Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root
access.


starmax1# ifconfig -a
rtk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:50:bf:70:68:c5
        media: Ethernet autoselect (100baseTX)
        status: active
        inet 192.168.1.115 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::250:bfff:fe70:68c5%rtk0 prefixlen 64 scopeid 0x1
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33228
        inet 127.0.0.1 netmask 0xff000000
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        inet6 ::1 prefixlen 128
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
tun0: flags=10<POINTOPOINT> mtu 1500
tun1: flags=10<POINTOPOINT> mtu 1500
tun2: flags=10<POINTOPOINT> mtu 1500
tun3: flags=10<POINTOPOINT> mtu 1500
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

starmax1# ping 192.168.1.75
PING asterix (192.168.1.75): 56 data bytes