Hi
 Using the ISO I downloaded this morning, I re-installed the OS completely
on my mac 9600. And the same thing happens, any access to the FPA hangs.
Interestingly, a ping or anything will cause a hang of the box, however, its
seems to be only incoming packets cause this problem,

If I ping a non-existant host (like 192.168.1.33) I get the 'host is down'
as a response, however, if I ping a real host, the box hangs solid.

I have filed a PR on this, `port-macppc/13566'.

Included is my DMESG, for those curious :)

NetBSD 1.5.1 (GENERIC) #9: Mon Jul 2 08:58:45 PDT 2001
matt@duel.local:/u1/kobj/GENERIC
CPU: 604ev (Revision 1203)
total memory = 128 MB
avail memory = 113 MB
using 1664 buffers containing 6656 KB of memory
mainbus0 (root)
cpu0 at mainbus0bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
ppb0 at pci0 dev 15 function 0: unknown vendor 0x1668 product 0x0100 (rev.
0x11)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
NEC uPD72870 IEEE 1394 OHCI Host Controller (Firewire serial bus, interface
0x10
, revision 0x01) at pci1 dev 12 function 0 not configured
ohci0 at pci1 dev 13 function 0: Opti RM861HA (rev. 0x10)
ohci0: interrupting at irq 25
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:05:02:56:02:00
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0
adb0 addr 14: unknown type device, (handler 192) unsupported
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci2 at bandit1 bus 2
pci2: i/o space, memory space enabled
pchb1 at pci2 dev 11 function 0
pchb1: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
fpa0 at pci2 dev 13 function 0: DEC DEFPA PCI FDDI SAS Controller
fpa0: FDDI address 00:00:f8:bc:cd:07, FW=3.10, HW= , SMT V7.2
fpa0: FDDI Port = S (PMD = ANSI Multi-Mode)
fpa0: interrupting at irq 27
Acard product 0x0007 (SCSI mass storage, revision 0x01) at pci2 dev 14
function
0 not configured
ofb0 at pci2 dev 15 function 0: Integrated Micro Solutions TwinTurbo 128M
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation), using wskbd0
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:5:0): max sync rate 5.00MB/s
cd0 at scsibus0 target 5 lun 0: <YAMAHA, CRW6416S, 1.0d> SCSI2 5/cdrom
removable
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <SGI, SEAGATE ST31230N, 0272> SCSI2 0/direct
fix
ed
sd0: 1010 MB, 3992 cyl, 5 head, 103 sec, 512 bytes/sect x 2070235 sectors
cd1 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM CR-8005A, 4.0i> SCSI2
5/cdrom
removable
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs