Hi,
After some minor fussing and fiddling, I was able to install and boot 
NetBSD
1.5.1 this morning.  I installed it on a Performa 6360 using a serial 
console on ttyb and
the keyboard is et to ttyb as well.

The problem is that after my second boot (the first boot dropped me to 
single-user mode and edited rc.conf--all I added to rc.conf was 
configured=YES).  Then I rebooted.
And it stops here:

Jul 10 06:28:03 althea getty[183]: /dev/ttyE0: Device not configured

I waited an hour and nothing happened.  Any thoughts on how to fix this?
I imagine that the fix will involve booting into single user mode.  But 
how does
one accomplish that from the OF prompt?

Included below is my dmesg.

Thanks for any help.  I searched the NetBSD pages for a while and I can't
find anything directly relevant (but I am a newbie, more or less).

Thanks,
Jeff

Jeffrey P. Hergan, Ph.D.
Adjunct Professor of Philosophy
Saint Xavier University
Chicago

NetBSD 1.5.1 (GENERIC) #9: Mon Jul  2 08:58:45 PDT 2001
     matt@duel.local:/u1/kobj/GENERIC
CPU: 603ev (Revision 201)
total memory = 73728 KB
avail memory = 62520 KB
using 947 buffers containing 3788 KB of memory
no active packagemainbus0 (root)
cpu0 at mainbus0: ohare L2 cache enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
de0 at pci0 dev 13 function 0
de0: interrupting at irq 23
de0: 21041 [10Mb/s] pass 2.1
de0: address 00:00:c5:0c:62:99
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1 (console)
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0
ams0 at adb0 addr 3: EMP mouse <@200> 1-button, 200 dpi
wsmouse0 at ams0
wdc0 at obio0 offset 0x20000 irq property not found; using 13: DMA 
transfer
wd0 at wdc0 channel 0 drive 0: <IBM-DPTA-371360>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 13042 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 26712000 
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
de0: enabling 10baseT port
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-8008, 8.0h> SCSI2 
5/cdrom removable
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
swapctl: adding /dev/wd0b as swap device at priority 0
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 1110 files, 22746 used, 9381 free (69 frags, 1164 blocks, 
0.2% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
/dev/rwd0g: 10618 files, 157683 used, 12585459 free (10291 frags, 
1571896 blocks, 0.1% fragmentation)
/dev/rwd0g: MARKING FILE SYSTEM CLEAN
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: althea
add net 127.0.0.0: gateway 127.0.0.1
add net fe80::: gateway ::1
add net fec0::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::224.0.0.0: gateway ::1
add net ::127.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net ::255.0.0.0: gateway ::1
add net 2002:e000::: gateway ::1
add net 2002:7f00::: gateway ::1
add net 2002:0000::: gateway ::1
add net 2002:ff00::: gateway ::1
add net ::0.0.0.0: gateway ::1
IPv6 mode: host
Configuring network interfaces:.
writing to routing socket: Network is unreachable
add net default: gateway 24.17.42.1: Bad file descriptor
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Updating motd.
starting local daemons:.
Starting inetd.
Starting cron.
Tue Jul 10 06:28:01 PDT 2001
Jul 10 06:28:03 althea getty[183]: /dev/ttyE0: Device not configured