Cool..

I'll get mine soon too.. :))

So how does it run NetBSD ?

Is t as good as a Pismo ?

sam.

on 3/8/01 0:32, Andrew Brown at atatat@atatdot.net wrote:

> NetBSD 1.5 (PISMO.NEW) #3: Thu Jun  8 01:00:45 PDT 2000
> root@dhcpclient:/usr/src/sys/arch/macppc/compile/PISMO.NEW
> CPU: Version ffff800c (Revision 1102)
> total memory = 256 MB
> avail memory = 226 MB
> using 2867 buffers containing 13208 KB of memory
> mainbus0 (root)
> cpu0 at mainbus0uninorth0 at mainbus0
> pci0 at uninorth0 bus 0
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 11 function 0
> pchb0: vendor 0x106b product 0x0020 (rev. 0x00)
> ofb0 at pci0 dev 16 function 0: vendor 0x1002 product 0x4c46
> ofb0: 1152 x 768, 8bpp
> wsdisplay0 at ofb0: console (std, vt100 emulation)
> uninorth1 at mainbus0
> pci1 at uninorth1 bus 0
> pci1: i/o space, memory space enabled
> pchb1 at pci1 dev 11 function 0
> pchb1: vendor 0x106b product 0x001f (rev. 0x00)
> obio0 at pci1 dev 23 function 0: addr 0x80000000
> zsc0 at obio0 offset 0x13000: irq 22,23
> zstty0 at zsc0 channel 0
> zstty1 at zsc0 channel 1
> davbus at obio0 offset 0x14000 not configured
> adb0 at obio0 offset 0x16000 irq 25: 3 targets
> akbd0 at adb0 addr 2: mapped device (195)
> wskbd0 at akbd0: console keyboard, using wsdisplay0
> adb0 addr 3: relative positioning device (1) not configured
> adb0 addr 7: misc. device (remote control?) (31) unsupported
> battery at obio0 offset 0x0 not configured
> backlight at obio0 offset 0xf300 not configured
> wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
> wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
> atapibus0 at wdc1 channel 0
> cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8187, , HA15> type 5 cdrom
> removable
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
> radio at obio0 offset 0x30000 not configured
> ohci0 at pci1 dev 24 function 0: vendor 0x106b product 0x0019 (rev. 0x00)
> ohci0: interrupting at irq 27
> ohci0: OHCI version 1.0
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ohci1 at pci1 dev 25 function 0: vendor 0x106b product 0x0019 (rev. 0x00)
> ohci1: interrupting at irq 28
> ohci1: OHCI version 1.0
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> cbb0 at pci1 dev 26 function 0: vendor 0x104c product 0xac1e (rev. 0x00)
> cbb0: interrupting at irq 58
> cbb0: cacheline 0x8 lattimer 0x20
> cbb0: bhlc 0x21008 lscp 0x20010100
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> uninorth2 at mainbus0
> pci2 at uninorth2 bus 0
> pci2: i/o space, memory space enabled
> pchb2 at pci2 dev 11 function 0
> pchb2: vendor 0x106b product 0x001e (rev. 0x00)
> vendor 0x106b product 0x0018 (Firewire serial bus, interface 0x10, revision
> 0x01) at pci2 dev 14 function 0 not configured
> gm0 at pci2 dev 15 function 0: Ethernet address 00:30:65:d6:30:00
> gm0: interrupting at irq 41
> ukphy0 at gm0 phy 0: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x001018, model 0x001e, rev. 3
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> md0: internal 2048K image area
> boot device: cd0
> root on cd0a dumps on cd0b
> root file system type: cd9660
>