Hello,

	Just wanted to check if I can get pilot-xfer to work on my mac.  I
have pilot-link and all its tools like pilot-xfer intalled.  I intalled them
all using pkg_src.  when I boot I see this line in the dmesg.

ugen0: Palm Computing, Inc. USB Serial Adaptor, rev 1.00/1.00, addr 2


but if I do ls /dev/u*

zulu 15% ls /dev/u*
/dev/uhid0   /dev/uhid2   /dev/uk0     /dev/ulpt0   /dev/urandom /dev/usb0
/dev/uhid1   /dev/uhid3   /dev/uk1     /dev/ulpt1   /dev/usb     /dev/usb1

there is no ugen0.
Here is my dmsg any ideas as to what the device name for my usb palm might
be?


Thank you 

Rene




NetBSD 1.5 (MYKERNEL) #0: Tue Jan 30 07:02:06 CST 2001
    root@zulu.bmen.tulane.edu:/usr/src/sys/arch/macppc/compile/MYKERNEL
CPU: 7400 (Revision 209)
total memory = 128 MB
avail memory = 111 MB
using 1664 buffers containing 6656 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 1MB backside cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x5046
ofb0: 1280 x 1024, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation)
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
ppb0 at pci1 dev 13 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (
rev. 0x05)
pci2 at ppb0 bus 1
pci2: i/o space, memory space enabled
ahc0 at pci2 dev 4 function 0
ahc0: interrupting at irq 54
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs
scsibus0 at ahc0 channel 0: 8 targets, 8 luns per target
obio0 at pci2 dev 7 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
adb0 at obio0 offset 0x16000 irq 25: 0 targets
aed0 at adb0 addr 0: ADB Event device
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <WDC AC24300L>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4112 MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x 8421840 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8585, , 1A28> type 5 cdrom removab
le
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
sd0 at atapibus0 drive 1: <IOMEGA  ZIP 100       ATAPI, , 04.H> type 0 direct re
movable
sd0: drive offline
sd0: drive supports PIO mode 3, DMA mode 1
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
ohci0 at pci2 dev 8 function 0: Apple Computer KeyLargo USB Controller (rev. 0x0
0)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci2 dev 9 function 0: Apple Computer KeyLargo USB Controller (rev. 0x0
0)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Texas Instruments TSB12LV23 OHCI IEEE 1394 Host Controller (Firewire serial bus,
 interface 0x10) at pci2 dev 10 function 0 not configured
uninorth2 at mainbus0
pci3 at uninorth2 bus 0
pci3: i/o space, memory space enabled
pchb2 at pci3 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
gm0 at pci3 dev 15 function 0: Ethernet address 00:30:65:52:8c:0e
gm0: interrupting at irq 41
ukphy0 at gm0 phy 0: Generic IEEE 802.3u media interface
ukphy0: BCM5201 10/100 media interface (OUI 0x001018, model 0x0021), rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
scsibus0: waiting 2 seconds for devices to settle...
uhub2 at uhub1 port 1ugen0 at uhub0 port 1
uhub2: Alps Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.10, addr 2

ugen0: Palm Computing, Inc. USB Serial Adaptor, rev 1.00/1.00, addr 2
uhub2: 3 ports with 2 removable, bus powered
ukbd0 at uhub2 port 1 configuration 1 interface 0
ukbd0: Alps Electric Apple USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1
wskbd1 at ukbd0: console keyboard, using wsdisplay0
ums0 at uhub2 port 2 configuration 1 interface 0
ums0: Mitsumi Apple USB Mouse, rev 1.00/5.05, addr 4, iclass 3/1
ums0: 1 buttons
wsmouse1 at ums0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ukbd_enable: ukbd0: bad call on=1