Subject: Power Computing Power Tower Pro
To: None <port-macppc@netbsd.org>
From: Erik E. Fair <fair@digital.clock.org>
List: port-macppc
Date: 10/03/2000 23:07:29
For the FAQ, this model has OF 1.0.5

It would be good to add "isp" to the GENERIC; FWB (which became
Hammer Storage) sold PCI SCSI controllers based on the Qlogic ISP SCSI
controller under the name "Jackhammer".

Booting a 1.4.3 GENERIC results in:

Open Firmware, 1.0.5
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot scsi/sd@0:0
>> NetBSD/macppc OpenFirmware Boot, Revision 1.1
>> (root@rubidium.clock.org, Tue Oct  3 08:01:07 PDT 2000)
Booting scsi/sd@0/netbsd
1889524@0x100000+175996@0x2cd4f4
 start=0x100000
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.3 (GENERIC) #19: Tue Oct  3 09:11:36 PDT 2000
    root@rubidium.clock.org:/usr/obj/sys/arch/macppc/compile/GENERIC
CPU: 604ev (Revision 204)
real mem  = 268435456
avail mem = 243478528
using 2867 buffers containing 13418496 bytes of memory
no active packagemainbus0 (root)
cpu0 at mainbus0
pci0 at mainbus0 bus 0
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer PCI Controller (rev. 0x03)
de0 at pci0 dev 13 function 0
de0: interrupting at irq 23
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:ad:ae:b5
de0: enabling 10baseT port
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
probe(esp0:0:0): max sync rate 6.25Mb/s
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, M1606S-512, 6226> SCSI2 0/direct fixed
sd0: 1041MB, 3457 cyl, 6 head, 102 sec, 512 bytes/sect x 2131992 sectors
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:a0:59:04:c5:03
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0
ams0 at adb0 addr 3: EMP trackball <LT02> 3-button, 200 dpi
wsmouse0 at ams0
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
pci1 at mainbus0 bus 1
pci1: i/o enabled, memory enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer PCI Controller (rev. 0x03)
ofb0 at pci1 dev 14 function 0: ATI Technologies Mach64 GX
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0
Q Logic ISP1020 (SCSI mass storage, revision 0x05) at pci1 dev 15 function 0 not
 configured
wscons: wskbd0 glued to wsdisplay0
no active packageboot device: <unknown>
root device: sd0
dump device (default sd0b):
file system (default generic):
root on sd0a dumps on sd0b
sd0: NetBSD disklabel
no file system for sd0 (dev 0x400)
cannot mount root, error = 79
root device (default sd0a): sd0h
dump device (default sd0b): none
file system (default generic): ffs
root on sd0h
WARNING: clock lost 16108 days -- CHECK AND RESET THE DATE!
swapctl: Cannot open `/etc/fstab': No such file or directory
Automatic boot in progress: starting file system checks.
fsck: Cannot open `/etc/fstab': No such file or directory
fsck: Can't open checklist file: /etc/fstab

Automatic file system check failed; help!
Enter pathname of shell or RETURN for sh:
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for access.
# df
Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
root_device   1029154   109758   867938    11%    /
#