In trying to test every system I can possibly find that will boot NetBSD
for 1.5 :^) I ran into this problem with a powermac-6500 I scrounged at
work: when trying to download the source sets from netbsd.org, or doing
anything else requiring a moderately large amount of network activity, it
hangs almost immediately.  After rebooting, I see lots of these messages
in the logs:

Jun 26 09:52:58 ngamblemac ypbind[118]: broadcast: sendto: No buffer space available

1.4.2 and 1.5_ALPHA both exhibit the problem.  The driver which recognizes
the onboard ethernet interface is de, tlp doesn't.  Scanning the open PRs
I didn't see one on this.

Is this a known bug, or should I send-pr it?  (Or am I just missing
something?  It wouldn't be the first time....)

						Konrad Schroder
						perseant@hhhh.org

The system is a stock 6500/250:

NetBSD 1.5_ALPHA (LEMON) #2: Mon Jun 26 04:15:11 PDT 2000
    perseant@ngamblemac:/usr/src/sys/arch/macppc/compile/LEMON
CPU: 603ev (Revision 201)
total memory = 65536 KB
avail memory = 57048 KB
using 844 buffers containing 3376 KB of memory
mainbus0 (root)
cpu0 at mainbus0bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0001 (rev. 0x03)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <WDC AC33200L>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3098 MB, 6296 cyl, 16 head, 63 sec, 512 bytes/sect x 6346368 sectors
wd0: drive supports PIO mode 4, DMA mode 2
adb0 at obio0 offset 0x16000 irq 18: 0 targets
aed0 at adb0 addr 0: ADB Event device
de0 at pci0 dev 17 function 0
de0: interrupting at irq 22
de0: 21041 [10Mb/s] pass 1.1
de0: address 00:a0:40:5c:cf:f0
ofb0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4754
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0
de0: enabling 10baseT port
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-8012, 1.0f> SCSI2
5/cdrom removable
sd0 at scsibus0 target 5 lun 0: <IOMEGA, ZIP 100, E.08> SCSI2 0/direct
removable
sd0: drive offline
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
de0: enabling 10baseT port