I'm trying to install on my C600/200 with the bootfloppy-990220.fs.

The machine has 32mb and the 2.1gb Western Digital IDE drive. The floppy
boots the box and I get the following and sysinst starts up but fails to
partion the drive and if I try to configure the network that fails as
well. I've got 2 pci ethernet cards, one is a Dayna card based on the
DEC chip and the other a Farallon based on the 3com 3c595-TX. I'd like
to get this machine working to replace my Quadra 700 as gateway/netatalk
server. Anyone have a floppy image that may work for me?

Here is the boot info:

>> NetBSD/macppc OpenFirmware Boot, Revision 1.1
>> (tsubai@kanea, Mon Feb 22 05:51:53 JST 1999)
Booting fd/netbsd
2805608@0x100000+147956@0x3acf68
 start=0x100000
Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3I (INSTALL) #0: Tue Feb 23 04:13:40 JST 1999
    tsubai@kanea:/c/snap/src/sys/arch/macppc/compile/INSTALL
CPU: 603ev (Revision 201)
real mem  = 33554432
avail mem = 24928256
using 800 buffers containing 3276800 bytes of memory
mainbus0 (root)
cpu0 at mainbus0
pci0 at mainbus0 bus 0
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0001 (rev. 0x03)
vendor 0x1011 product 0x0014 (ethernet network, revision 0x21) at pci0
dev 13 function 0 not configured
ep0 at pci0 dev 14 function 0: 3Com 3c595-TX 10/100 Ethernet
ep0: interrupting at irq 25
ep0: address 00:00:c5:4f:56:e6, 64KB word-wide FIFO, 3:1 Rx:Tx split
ep0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX (default 10baseT)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
cd0 at scsibus0 targ 3 lun 0: <MATSHITA, CD-ROM CR-506, 8S05> SCSI2
5/cdrom removable
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
adb0 at obio0 offset 0x16000 irq 18: 2 targets
akbd0 at adb0 addr 2: keyboard II
wskbd0 at akbd0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse at ams0 not configured
wdc0 at obio0 offset 0x20000 irq property not found; using 13,2
wd0 at wdc0 channel 0 drive 0: <WDC AC22100L>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 2014MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x 4124736 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
md0: internal 1536K image area
boot device: <unknown>
root on md0a dumps on md0b
WARNING: clock lost 15518 days -- CHECK AND RESET THE DATE!
root file system type: ffs
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
Terminal type? [vt100]
Erase is backspace.
(I)nstall, (S)hell or (H)alt ? i