Hello all-

	I just bought an old LCIII, and although I'm planning to keep it
as a MacOS box, I'm trying to get NetBSD on it. It has only 80mb of disk,
so a local install is out of the question IMHO. I compiled a minimal,
NFS-root kernel and the complete userland from a NetBSD/i386 box.
Everything seems to be working fine, except I'm not sure if swap is
working 100% (swapctl -l crashes in multiuser mode), and some utmp-based
programs fail, including w, top, ps -u and uptime.

w, top and uptime simply freeze (they break with ctrl-C), and ps -u dumps
core. Root and swap are mounted off of a Debian Linux machine.

ps without -u works. Oh, also, ftp, ping and lynx report bogus times,
going from 0kb/sec to 20000+kB/sec (impossible here... heh)

Thanks a bunch in advance!

elsie: {3} ls -l /var/run/
total 96
-rw-r--r--  1 root  wheel      4 May  9 12:55 cron.pid
-rw-r--r--  1 root  wheel  28672 May  9 12:54 dev.db
-rw-r--r--  1 root  wheel   2242 May  9 12:55 dmesg.boot
-rw-r--r--  1 root  wheel      4 May  9 12:55 inetd.pid
-r--r--r--  1 root  wheel     33 May  9 12:55 ld.so.hints
srw-rw-rw-  1 root  wheel      0 May  9 12:54 log
-rw-r--r--  1 root  wheel      3 May  9 12:54 syslogd.pid
-rw-r--r--  1 root  wheel      0 May  9 12:54 syslogd.sockets
-rw-rw-r--  1 root  utmp    1008 May  9 13:13 utmp

Here is dmesg:

NetBSD 1.6.1_STABLE (ELSIE) #1: Thu May  8 22:32:29 EDT 2003
    root@pfzt.net:/usr/src/sys/arch/mac68k/compile/ELSIE
Apple Macintosh Performa 460  (68030)
cpu: delay factor 351
total memory = 12288 KB
avail memory = 8312 KB
using 179 buffers containing 716 KB of memory
mrg: 'LC III ROMs' ROM glue, tracing off, debug off, silent traps
mrg: I/O map kludge for ROMs that use hardware addresses directly.
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0
asc0 at obio0: Apple Sound Chip
intvid0 at obio0 @ 60b00000: On-board video
intvid0: 640 x 480, monochrome
macfb0 at intvid0
wsdisplay0 at macfb0 (kbdmux ignored): console (std, vt100 emulation)
ncrscsi0 at obio0
scsibus0 at ncrscsi0 channel 0: 8 targets, 8 luns per target
zsc0 at obio0 chip type 0
zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
zstty0 at zsc0 channel 0
zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
ae0 at nubus0 slot e: MacCon LC III, 64KB memory
ae0: Ethernet address 00:00:94:45:21:44
fpu0 at mainbus0 (emulator)
ae0: length does not match next packet pointer
ae0: len 0000 nlen ff00 start 12 first 00 curr 0c next 00 stop 100
ae0: NIC memory corrupt - invalid packet length 65280
adb0 (direct, IIsi series): 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0 (mux ignored): console keyboard, using wsdisplay0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 (mux ignored)
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QUANTUM, CTS80S, 4.07> SCSI2 0/direct
fixed
sd0: 83100 KB, 1536 cyl, 2 head, 54 sec, 512 bytes/sect x 166200 sectors
boot device: sd0
root on ae0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=elsie.helgedom.org
nfs_boot: my_addr=192.168.1.16
nfs_boot: my_mask=255.255.255.0
root on hednisk.helgedom.org:/opt/share/netbsd-mac68k/
PRAM: 0x3ebb96c8, macos_boottime: 0x3ebb96ac.


-- 
=========================================================
Claudio Leite              | http://www.tux.org/~claudio/
leitec at staticky dot com | http://www.staticky.com/
---------------------------------------------------------