--n8g4imXOkfNTN/H1
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi,

	I was wondering if someone on this list could give me some feedback
on the _speed_ of building packages from pkgsrc on NetBSD/mac68k.  I am
currently using a Macintosh Quadra 650 with a 500MB SCSI2 hard drive and
48MB RAM and running NetBSD-1.5.1.  When I built devel/pth, it took 1307
seconds to build, which seemed longer than I remember back from when I owned
a Mac LC III.  It's unclear to me if my memory is just poor or if the machine
I'm using is just misconfigured.  I've attached the dmesg for the Quadra.
I also have the following bits of info (not sure if it matters):

>> uptime
 7:11PM  up 104 days, 19:17, 1 user, load averages: 1.09, 0.77, 0.42

>> vmstat -i
interrupt                           total     rate
via2                             91285612       10
ethernet                           738133        0
scc                              21371229        2
via1                            564613258       62
clock                           543256174       59
Total                          1221264406      134

	Thanks,

	-- Johnny Lam <jlam@netbsd.org>

--n8g4imXOkfNTN/H1
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

[ preserving 418597 bytes of netbsd a.out symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.1 (GENERIC) #0: Wed Jul 11 15:55:34 CST 2001
    oster@piggy.oster.net:/u3/mac68k/src/sys/arch/mac68k/compile/GENERIC
Apple Macintosh Quadra 650  (68040)
cpu: delay factor 1067
total memory = 49152 KB
avail memory = 41684 KB
using 640 buffers containing 2560 KB of memory
mrg: 'Quadra/Centris ROMs' ROM glue, tracing off, debug off, silent traps
mrg: I/O map kludge for ROMs that use hardware addresses directly.
mainbus0 (root)
obio0 at mainbus0
esp0 at obio0 (quick): address 0x898000: NCR53C96, 16MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
adb0 at obio0
asc0 at obio0: Apple Sound Chip
intvid0 at obio0 @ f9001000: DAFB video subsystem, monitor sense 1
intvid0: 640 x 480, monochrome
macfb0 at intvid0
wsdisplay0 at macfb0: console (std, vt100 emulation)
sn0 at obio0: integrated Ethernet adapter
sn0: Ethernet address 08:00:07:7c:86:57
iwm0 at obio0: Apple GCR floppy disk controller
iwm: Chip revision not supported (-77)
zsc0 at obio0 chip type 0 
zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
zstty0 at zsc0 channel 0
zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
fpu0 at mainbus0 (mc68040)
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:0:0): max sync rate 4.03MB/s
sd0 at scsibus0 target 0 lun 0: <QUANTUM, LP240S GM240S01X, 6.3> SCSI2 0/direct fixed
sd0: 234 MB, 1818 cyl, 4 head, 65 sec, 512 bytes/sect x 479350 sectors
probe(esp0:2:0): max sync rate 4.03MB/s
sd1 at scsibus0 target 2 lun 0: <COMPAQPC, DORS-32160, WA8B> SCSI2 0/direct fixed
sd1: 2006 MB, 6703 cyl, 5 head, 122 sec, 512 bytes/sect x 4110000 sectors
adb0 (direct, II series): 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0
boot device: sd1
root on sd1a dumps on sd1b
PRAM: 0x3c4751cf, macos_boottime: 0x3c4751c5.
root file system type: ffs

--n8g4imXOkfNTN/H1--