Subject: Re: Unable to get network up
To: None <email@example.com>
From: Mark Andres <firstname.lastname@example.org>
Date: 06/18/1998 07:35:36
As a test, try this command as root:
ifconfig inet 192.168.0.1 netmask 255.255.255.0
This should be doing the same thing as the rc script on startup. Aftr
this command run
to see if the interface is up or not. At least from your dmesg output, it
looks like the kernel is recognizing your NIC.
On Wed, 17 Jun 1998 email@example.com wrote:
> Please take a look & see if you notice any mistakes which would hose a
> local e-net network. My guess is the card isn't well behaved, however,
> it works on the mac side fine.
> I am trying to get a IIsi running as an IPNat gateway. The silk screen
> on the ethernet card says its a MacCON+ (which is supported) however
> NetBSD reports something else(see dmesg).
> The IIsi has an address of 192.168.0.1 . and anohter mac on the network
> has an address of 192.168.0.2 both with a class C subnet mask
> When I ping 192.168.0.1 I get:
> "ping: sendto: No route to host"
> however pinging localhost works fine.
> When I bring ppp up, I can ping & ftp the real world. I just seems the
> local net doesn't work.
> Here are the relevant files, netstat -i, & dmesg. The dmesg command
> doesn't print out all the messages from the original boot mesg. One
> line not included in dmesg that does show up at boot says:
> configuring network interfaces: ae0.
> #: bad value
> Here are the rest.
** snippage **
Mark Andres E-mail: firstname.lastname@example.org
Running NetBSD, 100% Microsoft Free!
Me & NetBSD: http://www2.giganet.net/~mark/NetBSD/