On Mon, 16 Feb 1998, Bill Studenmund wrote:

> These IP addresses are wrong. They should be
> <local_IP_address>:<remote_IP_address>. So they should look something
> like:
> 
> 140.172.10.48:140.172.10.103
> 
> and 
> 
> 140.172.10.103:140.172.10.48
> 
> There shouldn't be three IP address between the two stanzas. Also, you
> only need to set the IP address on one side of the link. pppd will tkae
> its IP address from the remote end.
> 

no, let me rephrase that:

on the machine 140.172.10.48, the files look like:

options:
bsdcomp 15,15

options.tty00 (the serial link):
persist  netmask 255.255.255.0 140.172.10.48:140.172.10.103 local

options.tty01 (the modem (answering dialin) link):
persist netmask 255.255.255.0 140.172.10.48:140.172.10.110 modem

My setup to the machine 140.172.10.103 (tty00, serial cable to my Duo 230
running NetBSD) works fine.  The setup to 140.172.10.110 is a modem
listening for connections on tty01 (basically, waiting for my mac at home
to dial into it).  This is the setup that doesn't work.

Thanks,
	t



Tommy Tarka                    |           	  http://burri.to/~tommy
tommy@slackers.net             |   	http://www.slackers.net/AirTarka
************************************************************************
		"Morning's a state of mind."	-- Mark Podlipec