Subject: Dayna ethernet card, hostname.ae0
To: None <port-mac68k@NetBSD.ORG>
From: Hans-Christian Becker <hcb@phc.chalmers.se>
List: port-mac68k
Date: 07/27/1997 20:01:16
Hi all. Since no-one cared to answer my question regarding the built-in
ethernet on my 840 AV (sniff!) I boldly snatched a Dayna ethernet card. To
my great disappointment, this is what NetBSD told me (see below). Is this
just tough luck, or can it be remedied? On a related question, I remember
seeing that the 'hostname.ae0' type configuration has been replaced. Could
anyone give me a few hints as to set up the networking correctly? (Yes, I
did look at the networking-HOWTO on macbsd.com!)
Regards,
/hcb

(dmsg output)

NetBSD 1.2G (GENERIC) #34: Fri Jul 18 17:57:54 CDT 1997
    scottr@mystery:/amd/see/usr/src/sys/arch/mac68k/compile/GENERIC
Apple Macintosh Quadra 840AV  (68040)
real mem = 58720256
avail mem = 54145024
using 204 buffers containing 835584 bytes of memory
mrg: 'Quadra AV ROMs' ROM glue, tracing off, debug off, silent traps
mrg: I/O map kludge for ROMs that use hardware addresses directly.
adb: bus subsystem
\^H\^H\^H\^H\^H\^Hadb: mapped device (5) at 2
adb: 200 dpi mouse at 3
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0 (ADB event device)
intvid0 at obio0: Internal Video
intvid0: 640 x 870, monochrome
grf0 at intvid0
ite0 at grf0 (minimal console)
esp0 at obio0: address 0x8aa000: NCR53C96, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, LPS540S, 590A> SCSI2 0/direct fixed
sd0: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec x 1057616 sectors
sd1 at scsibus0 targ 2 lun 0: <MICROP, 4110-09NB_Nov18b, TN0F> SCSI2
0/direct fixed
sd1: 1002MB, 2428 cyl, 9 head, 93 sec, 512 bytes/sec x 2053880 sectors
sd2 at scsibus0 targ 6 lun 0: <IBM, DORS-32160, WA6A> SCSI2 0/direct fixed
sd2: 2063MB, 6703 cyl, 5 head, 126 sec, 512 bytes/sec x 4226725 sectors
zsc0 at obio0 chip type 0
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
nubus0 slot c: EtherNet card (Vendor: Dayna Communications Inc., Part:
SMALL-ALABAMA-ROM) Type: 0004 0001 0115 0100 not configured
fpu0 at mainbus0 (mc68040)
boot device: sd2
root on sd2a dumps on sd2b
PRAM time does not appear to have been read correctly.
PRAM: 0x83da8254, macos_boottime: 0x33dba1ce.
root file system type: ffs

---
Hans-Christian Becker (hcb@phc.chalmers.se)
Dept. of Physical Chemistry
Chalmers University of Technology
Sweden