Subject: Re: Booter freeze
To: Netbsd <port-mac68k@NetBSD.ORG>
From: Alex Precosky <Alex@pop.mag-net.com>
List: port-mac68k
Date: 02/02/1997 18:49:09
*This message was sent using a trial version of CommuniGate(tm) SMTPGate*

On Mon, Feb 3, 1997, 12:28:55 AM GMT Masami and Ken Nakata wrote:


>*This message was received using a trial version of CommuniGate(tm) POPGate*
>On Sat, 01 Feb 1997 15:38:28 -0800,
>Alex Precosky <apreco@mag-net.com> wrote:
>> Colin Wood wrote:
>> > 2) try using a standard Apple mouse if you still have one.  Occasionally
>> > non-standard ADB devices will cause a problem (most are better behaved
>>
>> I just tried it with a standard apple mouse, and it still didn't work)-:
>> Arrgh, I've been trying to boot this on my macII for 3 months with no
>> sucsess.
>
>Can you write down the boot message that NetBSD spits out and show it
>to us?  That might help.
>
>Ken
>
>
Ok, here's a bootlog of it trying to boot.

Logging to bootlog
Booting...sizeof struct exec = 32
Magic = NMAGIC (read-only text)
MID_M68K executable: entry 0x3382.
Allocated 1489916 bytes.
924892 (0x0)+62192+83260+157428+145132

Set _boothowto to 0x2.
start address = 0x3382.
total kernel buffer space used = 1373712 (0x14f610).
The warm and fuzzy copycode() is at 0x000cf322
Hex dump of copycode():

(0x000cf322) 4E 56 00 00 40 C0 00 40 07 00 46 C0 20 6E 00 08 
(0x000cf332) 22 6E 00 0C 20 2E 00 10 22 D8 53 80 66 FA 2C 2E 
(0x000cf342) 00 1C 2E 2D E3 AE 2A 2E 00 18 26 6D E3 BE 24 6D 
(0x000cf352) E3 B6 28 2D E3 BA 28 6D E3 B2 22 6D E3 AA 93 EE 
harry() is at 0x239c00
Hex dump of Harry(), our friend!
(...should be the same as copycode(), above...)

(0x00239c00) 4E 56 00 00 40 C0 00 40 07 00 46 C0 20 6E 00 08 
(0x00239c10) 22 6E 00 0C 20 2E 00 10 22 D8 53 80 66 FA 2C 2E 
(0x00239c20) 00 1C 2E 2D E3 AE 2A 2E 00 18 26 6D E3 BE 24 6D 
(0x00239c30) E3 B6 28 2D E3 BA 28 6D E3 B2 22 6D E3 AA 93 EE 

from = 0x000d2000, to = 0x00000000, len = 368640, entry = 0x00003382
  Bye-bye...
        So I sez to him...  The real way
        that it should be done is to...
Serial console flags = 0
Env: ÒROOT_SCSI_IDÓ set to 0 (0x0).
Env: ÒSINGLE_USERÓ set to 2 (0x2).
Env: ÒVIDEO_ADDRÓ set to -90177504 (0xfaa00020).
Env: ÒROW_BYTESÓ set to 1024 (0x400).
Env: ÒFLAGSÓ set to -2147352039 (0x80020219).
Env: ÒSCREEN_DEPTHÓ set to 8 (0x8).
Env: ÒDIMENSIONSÓ set to 31457920 (0x1e00280).
Env: ÒBOOTTIMEÓ set to 854924873 (0x32f51e49).
Env: ÒGMTBIASÓ set to 0 (0x0).
Env: ÒBOOTERVERÓ set to 108 (0x6c).
Env: ÒMACOS_VIDEOÓ set to -90177504 (0xfaa00020).
Env: ÒMACOS_SCCÓ set to 1357922304 (0x50f04000).
Env: ÒMACHINEIDÓ set to 6 (0x6).
Env: ÒMEMSIZEÓ set to 4 (0x4).
Env: ÒGRAYBARSÓ set to 1 (0x1).
Env: ÒSERIALECHOÓ set to 0 (0x0).
Env: ÒSERIALCONSOLEÓ set to 0 (0x0).
Env: ÒSERIAL_MODEM_FLAGSÓ set to 0 (0x0).
Env: ÒSERIAL_MODEM_HSKICLKÓ set to 0 (0x0).
Env: ÒSERIAL_MODEM_GPICLKÓ set to 0 (0x0).
Env: ÒSERIAL_PRINT_FLAGSÓ set to 0 (0x0).
Env: ÒSERIAL_PRINT_HSKICLKÓ set to 0 (0x0).
Env: ÒSERIAL_PRINT_GPICLKÓ set to 0 (0x0).
Env: ÒPROCESSORÓ set to 1 (0x1).
Env: ÒEND_SYMÓ set to 1373712 (0x14f610).
Env: ÒROMBASEÓ set to 1082130432 (0x40800000).
Env: ÒTIMEDBRAÓ set to 8363 (0x20ab).
Env: ÒADBDELAYÓ set to 784 (0x310).
Env: ÒHWCFGFLAGSÓ set to -1024 (0xfffffc00).
Env: ÒHWCFGFLAG2Ó set to -8193 (0xffffdfff).
Env: ÒHWCFGFLAG3Ó set to -1 (0xffffffff).
Env: ÒADBREINIT_JTBLÓ set to -1 (0xffffffff).

Set _mac68k_vrsrc_cnt to 0x1.

Set _mac68k_vrsrc_vec to {0x880a 0x0 0x0 0x0 0x0 0x0 }.