Hi,

I wanted to try the latest ADBTEST kernel on my IIci.  It boots and
probes the ADB ok most of the time(*), but after printing the PRAM time,
it shuts the machine *off*.  Normally it would ask for the root partition
here. (I have 'ask' checked)  Booting with a serial console works ok, but
serial boot echo doesn't.  
(*) The ADBTEST works most of the time, because occasionally it just prints
"adb: cleanup: nothing returned" 5-10 times, and hangs.  Pressing the
debugger switch results in the machine powering off.  I would wonder if
the intvid stuff is not working properly on my IIci?
My machine is:
  IIci w/ cache card (and internal video)
  32MB
  Internal 200MB
  External 380MB
  Asante MacCon II (I think that is the model)

I'll append the boot messages from a working serial console boot.

-Andrew

Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.

NetBSD 1.2 (ADBTEST) #160: Sun Sep 29 21:02:32 EDT 1996
    root@daedalus.netwizards.net:/usr/src/sys/arch/mac68k/compile/ADBTEST
Apple Macintosh IIci  (68030)
real mem = 33226752
avail mem = 29220864
using 204 buffers containing 835584 bytes of memory
mrg: kernel has no ROM vectors for this machine!
adb: bus subsystem
Got following HwCfgFlags: 0xfc00, 0x    773f, 0x       0, 0x408036c0
mrg: skipping egret setup
adb: calling ADBReInit
adb: using II series hardware support
adb: cleanup: nothing returned
adb: ADBReInit complete
adb: extended keyboard at 2
adb: 100 dpi mouse at 3
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0 (ADB event device)
asc0 at obio0 Apple sound chip.
intvid0 at obio0: Internal Video
intvid0: 640 x 480, monochrome
grf0 at intvid0
ite0 at obio0 (minimal console)
sbc0 at obio0: options=1<PDMA>
scsibus0 at sbc0
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, LXT-213S SUN0207, 4.22> SCSI1 0/direct fi
xed
sd0: 202MB, 1310 cyl, 7 head, 45 sec, 512 bytes/sec
sd1 at scsibus0 targ 5 lun 0: <IBM, 0661467, G l> SCSI2 0/direct fixed
sd1: sd1(sbc0:5:0): illegal request, data = 00 00 01 32 00 00 00 00 00 00 00 00
00 00 db 6d b6 db 6d b6 1a 00 04 00
sd1: could not mode sense (4); using fictitious geometry
382MB, 382 cyl, 64 head, 32 sec, 512 bytes/sec
zsc0 at obio0 chip type 0
zstty0 at zsc0 channel 0 (console) (raw defaults)
zstty1 at zsc0 channel 1
fpu0 at obio0 (mc68882)
nubus0 at mainbus0
ae0 at nubus0: address 00:00:94:60:ed:a9, type MacCon Ethernet, 32k mem.
PRAM time does not appear to have been read correctly.
PRAM: 0x83da4f80, macos_boottime: 0x326bf1a0.
Enter pathname of shell or RETURN for sh: