Subject: Re: Graphics card!!!
To: Mack Nagashima <mackn@CSUA.Berkeley.EDU>
From: Bill Studenmund <wrstuden@loki.stanford.edu>
List: port-mac68k
Date: 05/29/1996 09:24:39
> 
> 
> 	Alright..i got a new graphics card..well..not new but it's new to 
> me :)  It's a RasterOps 24Sx (24 bits @ 640 x 480)
> 	I tried to boot with graphics acceleration off nad all the extras 
> on the cards shut off..    i tired to boot with a generic kernel and 
> failed..i then tried to boot off of the 2 grf kernels..here's what i get..
> 
> <-snip snip->
> 
> Non-system RAM (nubus, etc.):
> 	Log = 0xf9000000, Phys = 0xf9000000, Len = 0x6000000 (100663296d)
>     no internal video at address 0 -- videoaddr is 0xf9000000
> DOne.
> Bootstrapping pmap system.
> Failure in BSD boot. nextpa = 0x110000, high[0] = 0x100000.
> ....
> then it gives some error of not having 32-bit addressing on..and stuff
> 
> Stopped at 		_Debugger+0x6;	unlk a6

Did you used to have a working system? Because the above line says
it all; you don't have 32 bit addressing on.

If your system used to work before the video card was added, then there's
a weird problem. check that you have 32 bit addressing on, and try
again.

Take care,

Bill