Subject: Re: Serial boot on PB550c
To: Allen Briggs <briggs@puma.bevd.blacksburg.va.us>
From: Takashi HAMADA <pm6@apricot.etron.kanazawa-it.ac.jp>
List: port-mac68k
Date: 02/27/1996 11:08:11
Hi.

At  9:18 96.2.24 -0500, Allen Briggs wrote:
>>  3. configured with a configuration file named as 'SPOT' which use
>>     the SCSI driver 'sbc0' (not 'ncrscsi0').
>
>You might try the ncrscsi0 driver, too.  That's rather surprising that
>the Powerbook has the 5380!

To check which controler PB550c use, I investigated the Gesutalt value
of Hardware attributes, it said that PB550c uses the 5380 chip!!!
I tried to boot with 'ncrscsi0' driver again, the booting process stopped
after the message "Changing root device to sd0a." was displayed....
I don't know why the 'sbc0' driver works on PB550c.


At  9:18 96.2.24 -0500, Allen Briggs wrote:
>> # fsck -p
>> /dev/rsd0a trap type 0, code = a5, v= c0a000
>> kernel: Bus error trap
>
>If you can repeat this, I'd like to see the output of a 'trace.'

O.K. I tried doing it. Following is the result.

---

# fsck -p
/dev/rsd0atrap type 0, code = a5, v= c0a000
kernel: Bus error trap
pid = 6, pc = 0x0009eff8, ps = 0x00002210, sfc = 0x00000001, dfc = 0x00000001
Registers:
             0        1        2        3        4        5        6        7
dreg: 00002748 0000003f 004c4b40 00c0a000 00002000 00002204 00000000 00000017
areg: 00c08050 00c0a000 096cc001 00788800 00bfe000 00002000 00a98c8c ffffc83c

Kernel stack (00a98bec):
00a98bec: 00c0a000  00002748  0000003f  004c4b40  00c0a000  00002000 
00002204  00000000 
00a98c0c: 00000017  00c08050  00c0a000  096cc001  00788800  00bfe000 
00002000  00a98c8c 
00a98c2c: ffffc83c  00000000  22100009  eff87008  00a98c88  00a50025 
002500a5  00c0a000 
00a98c4c: 00c0a000  00000000  00c0a000  00000000  00c0a000  00000000 
00000001  00000117 
panic: Bus error
Stopped at: 1      _Debugger+0x6367 :  unlk    a6
files, 21866 used, 17493 free (45 frags, 2181 blocks, 0.1% fragmentation)
db> trace
_Debugger(22598,af26c,a98ba8,0,a98bdc) + 6
_panic(af26c) + 34
_trap(0,a5,c0a000) + 1c4
_addrerr(788800,0,2000,96cc000) + bc
_ncr5380_scsi_cmd(788800,0) + 1f12
_ncr5380_scsi_cmd(788800,10bfa,7888a4,0,1013) + 229c
_ncr5380_scsi_cmd(788800,104a8,0,1001,6) + a46
_ncr5380_scsi_cmd(789d80) + 13e
_scsi_execute_xs(789d80) + 28
_scsi_scsi_cmd(78bfe0,a98dac,6,96cc000,2000,4,2710,985830,1001) + a6
_sdstart(784800,7848a2,985830) + 1e2
_sdstrategy(985830,985830,2000,31000,2000) + fe
_physio(9c21e,0,d00,0,9c5ca) + 186
_sdwrite(d00,a98f28,1) + 18
_spec_write(a98ed8,a98eec,3983c,a98ed8,e8) + a6
_ufsspec_write(a98ed8) + 28
_vn_write(794580,a98f28,789d00) + ca
_sys_write(795100,a98f88,a98f80) + a4
_syscall(4) + 13c
_trap0() + e
db> 

---


 8[%]8  Takashi HAMADA       Kanazawa Institute of Technology  //
  |#|                        System Design Engineering major   \\
  |#|   =====================================================  //
 (.= )  E-mail: hamada@next.etron.kanazawa-it.ac.jp            \\
 ( =:)          QFG03666@niftyserve.or.jp                      //