Subject: Re: current kernel ?'s
To: Allen Briggs <briggs@puma.bevd.blacksburg.va.us>
From: Yoshihisa SUGIMOTO <sugimoto@sums.shiga-med.ac.jp>
List: port-mac68k
Date: 11/05/1995 21:58:42
At 11:29 PM 95.11.2 -0500, Allen Briggs wrote:
>> 2)    Which machines does the adb work correctly on? (excluding 
>>        machine-specific mrg kernels)
>
>To my knowledge, the standard kernel works on the ADB for:
>        SE/30, II, IIx, IIcx, IIci, IIsi, IIvx, Perf 600, Q700
>
Does NetBSD run on Q700?
Or, does it mean only the adb works correctly on Q700?

After I read your mail, I tried NetBSD 1.1 Alpha on my Q700 with an 
external hard disk where I installed the system with SE/30. The kernel is 
compiled from the source dated Nov. 3.

The results were as follows;

[ preserving 89324 bytes of netbsd symbol table ]
Bootstrapping NetBSD/mac68k
Faked range to byte 0x1300000.
Bootstrapping the pmap system.
Pmap bootstrapped.
Moving ROMBase from 0x40800000 to 0x1800000.
Video address 0x9000e00 -> 0x2800e00.
Copyright (c) 1982, 1986, 1991, 1993
 The Regents of the University of California. All rights reserved.
 
NetBSD 1.1_ALPHA (GENERIC) #4: Sun Nov  5 19:17:53 JST 1995
    sugimoto@cxbsd:/local/current-src/src/sys/arch/mac68k/compile/GENERIC
Apple Macintosh Quadra 700  (68040)
real mem = 20971520
avail mem = 17453056
using 204 buffers containing 835584 bytes of memory
mrg: 'Mac IIci/Q700 ROMs' rom glue, tracing off, debug off, silent traps
adb: bus subsystem
Got following HwCfgFlags: 0xfc00, 0x 5a0183f, 0x       900, 0x         0
mrg: Not setting up egret.
mrg: ADB interrupts enabled.
adb: mapped device (8) at 2
adb: 100 dpi mouse at 3
mainbus0 (root)
ite0 at mainbus0 (minimal console)
adb0 at mainbus (ADB event device)
ser0 at mainbus0nubus0 at mainbus0
ncrscsi0 at mainbus0 not configured
ncr96scsi0 at mainbus0 not configured
asc0 at mainbus0 Apple sound chip.
fpu0 at mainbus0 (unknown type)
floppy0 at mainbus0 not configured
ARGH!!  No Boot device????Only supports DISK device for booting.
Changing root device to e.
panic: cannot mount root
Stopped at          _Debugger+0x6:  unlk      a6
db>

The results were same, when I decreased the available memory by 1 MBytes
on Booter 1.8. Also I tried CPU caching on and off, the same.

Yoshihisa SUGIMOTO, M.D., Ph. D. - sugimoto@sums.shiga-med.ac.jp
Department of Medicine I / Medical Information Center
Shiga University of Medical Science, Shiga, JAPAN
Tel +81-775-48-2213  FAX +81-775-43-5839