Re: VIA C3

[ball%grex.org@localhost (Andy Ball)]

Hello Thor,

    Here's the dmesg output from a very similar kernel that
includes uhci and ehci for USB 2.0 support.  I will be away
from this machine for about a week but will happily run some
tests for you when I return.

-Andy Ball


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.30 (NEHEMIAH-2.01) #3: Wed Jun 15 15:43:03 GMT 2016
	root@nehemiah:/usr/src/sys/arch/i386/compile/NEHEMIAH
total memory = 991 MB
avail memory = 969 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
VIA Technologies, Inc. VT8623-8235 ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000F6620 000014 (v00 VT9174)
ACPI: RSDT 0x000000003DFF3000 000028 (v01 VT9174 AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x000000003DFF3040 000074 (v01 VT9174 AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x000000003DFF30C0 002FDD (v01 VT9174 AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x000000003DFF0000 000040
ACPI: 1 ACPI AML tables successfully acquired and loaded

cpu0 at mainbus0
cpu0: VIA Nehemiah, id 0x691
acpi0 at mainbus0: Intel ACPICA 20160422
acpi0: X/RSDT: OemId <VT9174,AWRDACPI,42302e31>, AslId <AWRD,00000000>
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 12
LNKA: ACPI: Found matching pin for 0.16.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.16.INTB at func 1: 12
LNKC: ACPI: Found matching pin for 0.16.INTC at func 2: 10
LNKD: ACPI: Found matching pin for 0.16.INTD at func 3: 5
LNKA: ACPI: Found matching pin for 0.17.INTA at func 1: 255
LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 10
LNKA: ACPI: Found matching pin for 0.18.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM (PNP0C01) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1106 product 3123 (rev. 0x00)
agp0 at pchb0: aperture at 0xd0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: vendor 1106 product b091 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 1106 product 3122 (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
viadrmums0 at vga0drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: No driver support for vblank timestamp query.
fwohci0 at pci0 dev 13 function 0: vendor 1106 product 3044 (rev. 0x80)
fwohci0: interrupting at irq 12
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:40:63:00:00:03:b9:aa
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip at ieee1394if0 not configured
fwohci0: Initiate bus reset
uhci0 at pci0 dev 16 function 0: vendor 1106 product 3038 (rev. 0x80)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 1106 product 3038 (rev. 0x80)
uhci1: interrupting at irq 12
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 1106 product 3038 (rev. 0x80)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 3: vendor 1106 product 3104 (rev. 0x82)
ehci0: interrupting at irq 5
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
viapcib0 at pci0 dev 17 function 0: vendor 1106 product 3177 (rev. 0x00)
viapcib0: SMBus found at 0x500 (revision 0x0)
iic0 at viapcib0: I2C bus
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 10
auvia0: ac97: VIA Technologies VT1616i codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
auvia0: ac97: ext id 0x1c5<LDAC,SDAC,CDAC,SPDIF,VRA>
audio0 at auvia0: full duplex, playback, capture, mmap, independent
vr0 at pci0 dev 18 function 0: vendor 1106 product 3065 (rev. 0x74)
vr0: interrupting at irq 11
vr0: Ethernet address: 00:40:63:cc:22:37
ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 5
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at viapcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat  90 us, pow     0 mW
acpicpu0: C3: I/O, lat 900 us, pow     0 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  50 %
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0
wd0: <ST340014A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38146 MB, 77504 cyl, 16 head, 63 sec, 512 bytes/sect x 78125000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1
wd1: <Maxtor 32049H2>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 19073 MB, 38752 cyl, 16 head, 63 sec, 512 bytes/sect x 39062500 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/7.99.30/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)