Derrick Lobo
-----Original Message-----
From: Masanobu SAITOH [mailto:msaitoh%execsw.org@localhost]
Sent: Thursday, May 19, 2016 1:07 AM
To: Derrick Lobo; Kimihiro Nonaka
Cc: msaitoh%execsw.org@localhost; Joerg Sonnenberger; port-amd64%netbsd.org@localhost;
port-i386%netbsd.org@localhost; NONAKA Kimihiro
Subject: Re: Support for Intel P3xxx(3500) series PCIe SSD
Hi.
On 2016/05/13 23:06, Derrick Lobo wrote:
Sorry Im checking on the details.. Heres the output
000:00:0: ATI Technologies RD890 PCI Bridge GFX0 Port A (host bridge,
revision 0x02)
000:09:0: ATI Technologies RD890 PCI Express Bridge GPP Port H (PCI
bridge)
000:10:0: ATI Technologies RD890 PCI Bridge GFX1 Port A (PCI bridge)
000:17:0: ATI Technologies SB700-SB900 SATA Controller (IDE mode) (IDE
mass storage, interface 0x8f)
000:18:0: ATI Technologies SB700-SB900 USB OHCI Controller (USB serial
bus, OHCI)
000:18:1: ATI Technologies SB700-SB900 USB OHCI Controller (USB serial
bus, OHCI)
000:18:2: ATI Technologies SB700-SB900 USB EHCI Controller (USB serial
bus, EHCI)
000:19:0: ATI Technologies SB700-SB900 USB OHCI Controller (USB serial
bus, OHCI)
000:19:1: ATI Technologies SB700-SB900 USB OHCI Controller (USB serial
bus, OHCI)
000:19:2: ATI Technologies SB700-SB900 USB EHCI Controller (USB serial
bus, EHCI)
000:20:0: ATI Technologies SBx00 SMBus Controller (SMBus serial bus,
revision 0x3d)
000:20:1: ATI Technologies SB700-SB900 IDE Controller (IDE mass
storage, interface 0x8a)
000:20:3: ATI Technologies SB700-SB900 LPC Host Controller (ISA
bridge)
000:20:4: ATI Technologies SBx00 PCI to PCI Bridge (PCI bridge,
subtractive decode)
000:20:5: ATI Technologies SB700-SB900 USB OHCI Controller (USB serial
bus, OHCI)
000:24:0: AMD Family15h HyperTransport Configuration (host bridge)
000:24:1: AMD Family15h Address Map Configuration (host bridge)
000:24:2: AMD Family15h DRAM Configuration (host bridge)
000:24:3: AMD Family15h Miscellaneous Configuration (host bridge)
000:24:4: AMD Family15h Link Configuration (host bridge)
000:24:5: AMD Family15h North Bridge Configuration (host bridge)
000:25:0: AMD Family15h HyperTransport Configuration (host bridge)
000:25:1: AMD Family15h Address Map Configuration (host bridge)
000:25:2: AMD Family15h DRAM Configuration (host bridge)
000:25:3: AMD Family15h Miscellaneous Configuration (host bridge)
000:25:4: AMD Family15h Link Configuration (host bridge)
000:25:5: AMD Family15h North Bridge Configuration (host bridge)
001:00:0: Intel i82574L 1000baseT Ethernet (ethernet network)
002:00:0: Intel i82574L 1000baseT Ethernet (ethernet network)
003:04:0: Matrox MGA G200eW (VGA display, revision 0x0a)
Thanks. Perhaps the device which has some information I want is 0:0:0, but
it might be not. If you are ok, could you get the following shell script,
execute it and put the whole output to somewhere? The output helps not
only MSI/MSI-X stuff but also help to add some code to decode PCI(and/or
HyperTransport) capabilities used by "pcictl <pciN> dump"
http://www.netbsd.org/~msaitoh/pcidump
Regards.
-----Original Message-----
From: Masanobu SAITOH [mailto:msaitoh%execsw.org@localhost]
Sent: Thursday, May 12, 2016 10:56 PM
To: Derrick Lobo; Kimihiro Nonaka
Cc: msaitoh%execsw.org@localhost; Joerg Sonnenberger; port-amd64%netbsd.org@localhost;
port-i386%netbsd.org@localhost; NONAKA Kimihiro
Subject: Re: Support for Intel P3xxx(3500) series PCIe SSD
Hello.
On 2016/05/12 23:16, Derrick Lobo wrote:
Used nvme_pci.c r1.2 and it works.. I am able to mount the drive.
Excellent.
Thank you nonakap@
Thank you for your report.
As I wrote before:
me show the full dmesg and "pcictl pci0 list" on your machine
without the SSD.
Could you show the output of "pcictl pci0 list"?
The reason why is that your machine currently can't use MSI-X because
of the HyperTransport setting. See:
http://nxr.netbsd.org/xref/src/sys/dev/pci/pci.c#416
This code was taken from FreeBSD. This is the first time for us really
disabled by this code. Is it possible for you to check the
HyperTransport capability's setting? If not, please show me the output
of "pcictl pci0 list" first.
Regards.
-----Original Message-----
From: Kimihiro Nonaka [mailto:nonakap%gmail.com@localhost]
Sent: Wednesday, May 11, 2016 9:59 AM
To: Derrick Lobo
Cc: Masanobu SAITOH; Joerg Sonnenberger; port-amd64%netbsd.org@localhost;
port-i386%netbsd.org@localhost; NONAKA Kimihiro
Subject: Re: Support for Intel P3xxx(3500) series PCIe SSD
Hi,
Please try src/sys/dev/pci/nvme_pci.c r1.2.
2016-05-11 21:57 GMT+09:00 Derrick Lobo <derrick.lobo%givex.com@localhost>:
Im using amd64
Dmesg -a
NetBSD 7.99.29 (GENERIC.201605101220Z) amd64
The dmesg without the card installed is attached.
Thanks for your help
Derrick Lobo
-----Original Message-----
From: Masanobu SAITOH [mailto:msaitoh%execsw.org@localhost]
Sent: Wednesday, May 11, 2016 6:29 AM
To: Derrick Lobo; Joerg Sonnenberger; port-amd64%netbsd.org@localhost;
port-i386%NetBSD.org@localhost
Cc: msaitoh%execsw.org@localhost; nonaka%netbsd.org@localhost
Subject: Re: Support for Intel P3xxx(3500) series PCIe SSD
On 2016/05/11 19:17, Masanobu SAITOH wrote:
Hi
On 2016/05/11 6:34, Derrick Lobo wrote:
I used the netbsd current build from today and rcvd the following
error..
see pic attached. The drive is being recognized as nvme0.
This is the first build I tried Since Jan 29th.
In your pic:
> nvme0: interrupting at ioapic1 pin 4
Perhaps the driver have a bug when INTx is used. nonaka@ will test
and fix the problem.
Are you using XEN_DOM0?
NetBSD/xen doesn't support MSI-X. If it's not XEN_DOM0, please let
me show the full dmesg and "pcictl pci0 list" on your machine
without the SSD.
Regards.
Derrick Lobo
-----Original Message-----
From: port-amd64-owner%NetBSD.org@localhost
[mailto:port-amd64-owner%NetBSD.org@localhost] On Behalf Of Joerg
Sonnenberger
Sent: Friday, January 29, 2016 4:50 AM
To: port-amd64%netbsd.org@localhost; port-i386%netbsd.org@localhost
Subject: Re: Support for Intel P3xxx(3500) series PCIe SSD
On Wed, Jan 27, 2016 at 12:00:06PM -0500, Derrick Lobo wrote:
Seeing the following error after I added th Intel P3500 PCie SSD
2Tb on the server.. upgraded to netbsd 7 current dated 26th Jan
and got the same error
That's NVME, isn't it?
Joerg
--
-----------------------------------------------
SAITOH Masanobu (msaitoh%execsw.org@localhost
msaitoh%netbsd.org@localhost)
--
-----------------------------------------------
SAITOH Masanobu (msaitoh%execsw.org@localhost
msaitoh%netbsd.org@localhost)
--
-----------------------------------------------
SAITOH Masanobu (msaitoh%execsw.org@localhost
msaitoh%netbsd.org@localhost)