Port-i386 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

netbsd-5 on Citrix XenClient 2.1 (on an HP EliteBook 8460p)



For anyone interested, here's a dmesg from a rather verbose but
otherwise mostly GENERIC-like kernel booting on Citrix XenClient-2.1 on
an HP EliteBook 8460p.

There's a dmesg from the same kernel config running on the bare metal
here:  http://mail-index.netbsd.org/current-users/2012/01/24/msg018897.html

I have enabled the "expose physical hardware information" and "expose
physical OEM hardware" options in the VM "Advanced" panel, though I
didn't have them enabled during the install.

I noted some weird issues with "pauses" during installation, and they
continued on during multiuser runtime too.  I also had it go completely
catatonic just now and had to force a reboot from the Xen control panel.
I think it may have recovered eventually though -- sometimes these
pauses seem rather long.

re0 (and re1 when the wireless is active) is throwing "watchdog timeout"
warnings on the kernel which may correspond to some of the freezes.

dhclient can get addresses on both re0 and re1, but then neither work.
If I restrict it to just re0 then networking seems to work (and I'm
pretty sure that's over the hard-wired ethernet port).

Networking doesn't work very well though.  'ping -f' gets a lot of
packet loss, and is very slow sending.  Scp can't move big files, but it
can move small files.  The Windoze-7 VM doesn't seem to have any trouble
with networking -- it was able to retrieve all its many updates OK.

Audio doesn't work, despite lots of mention in the dmesg.  Even the
sysbeep bell fails to work.  Audio doesn't seem to work in the Windoze-7
VM either.  (I'm installing the XenClient Tools on Windoze now to see if
that'll help expose other devices, such as audio.)

You'll see an envstat report at the bottom too, and note the frigid CPU.  
(I'm pretty sure it was OK when NetBSD was running on the bare metal.)

-- 
                                                Greg A. Woods
                                                Planix, Inc.

<woods%planix.com@localhost>       +1 250 762-7675        http://www.planix.com/

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_STABLE (GENERIC) #1: Fri Jan 27 19:10:11 PST 2012
        
woods@more:/build/woods/more/netbsd-5-i386-i386-ppro-obj/once/rest/work/woods/m-NetBSD-5/sys/arch/i386/compile/GENERIC
total memory = 2047 MB
avail memory = 1998 MB
buf_memcalc: bufcache is preset to 5%
buf_memcalc: bufmem calculated to be to 107352064 bytes
nbuf (bufhashtbl size) = 34945
rnd: initialised (4096) with counter
timecounter: Timecounters tick every 1.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP EliteBook 8460p (A0001D02)
PCI BIOS rev. 2.1 found at 0xfb660
pcibios: config mechanism [1][x], special cycles [x][x], last bus 0
PCI IRQ Routing Table rev. 1.0 found at 0xfb960, size 128 bytes (6 entries)
PCI Interrupt Router at 000:01:0 (Intel 82371FB (PIIX) PCI-ISA Bridge 
compatible)
PIR Entry 0:
        Bus: 0  Device: 1
                INTA: link 0x61 bitmap 0x0c20
                INTB: link 0x62 bitmap 0x0c20
                INTC: link 0x63 bitmap 0x0c20
                INTD: link 0x60 bitmap 0x0c20
PIR Entry 1:
        Bus: 0  Device: 2
                INTA: link 0x62 bitmap 0x0c20
                INTB: link 0x63 bitmap 0x0c20
                INTC: link 0x60 bitmap 0x0c20
                INTD: link 0x61 bitmap 0x0c20
PIR Entry 2:
        Bus: 0  Device: 3
                INTA: link 0x63 bitmap 0x0c20
                INTB: link 0x60 bitmap 0x0c20
                INTC: link 0x61 bitmap 0x0c20
                INTD: link 0x62 bitmap 0x0c20
PIR Entry 3:
        Bus: 0  Device: 4
                INTA: link 0x60 bitmap 0x0c20
                INTB: link 0x61 bitmap 0x0c20
                INTC: link 0x62 bitmap 0x0c20
                INTD: link 0x63 bitmap 0x0c20
PIR Entry 4:
        Bus: 0  Device: 5
                INTA: link 0x61 bitmap 0x0c20
                INTB: link 0x62 bitmap 0x0c20
                INTC: link 0x63 bitmap 0x0c20
                INTD: link 0x60 bitmap 0x0c20
PIR Entry 5:
        Bus: 0  Device: 6
                INTA: link 0x62 bitmap 0x0c20
                INTB: link 0x63 bitmap 0x0c20
                INTC: link 0x60 bitmap 0x0c20
                INTD: link 0x61 bitmap 0x0c20
pciintr_link_fixup: PIRQ 0x00 already connected to IRQ 5
pciintr_link_fixup: PIRQ 0x01 already connected to IRQ 10
pciintr_link_fixup: PIRQ 0x02 already connected to IRQ 11
pciintr_link_fixup: PIRQ 0x03 already connected to IRQ 5
pciintr_link_route: route of PIRQ 0x00 -> IRQ 5 preserved BIOS setting
pciintr_link_route: route of PIRQ 0x01 -> IRQ 10 preserved BIOS setting
pciintr_link_route: route of PIRQ 0x02 -> IRQ 11 preserved BIOS setting
pciintr_link_route: route of PIRQ 0x03 -> IRQ 5 preserved BIOS setting
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
pciintr_header_fixup: no entry for link 0xde (0:1:0:@)
pciintr_header_fixup: no entry for link 0xde (0:1:1:@)
000:01:3 0x8086 0x7113   A  0x01  10  0    already assigned
000:04:0 0x5853 0x0001   A  0x00   5  0    already assigned
000:05:0 0x5853 0xc110   A  0x01  10  0    already assigned
000:06:0 0x10ec 0x8139   A  0x02  11  0    already assigned
------------------------------------------
pciintr_irq_release: fixup pciirq level/edge map 0x0c20
pciintr_irq_release: bios  pciirq level/edge map 0x0c20
pciintr_irq_release: final pciirq level/edge map 0x0c20
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfccd0
mainbus0: MP config table at 0xfcc00, 200 bytes long
Parsing all Control Methods:
Table [DSDT](id 0001) - 396 Objects with 55 Devices 136 Methods 6 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 91 Objects with 6 Devices 39 Methods 11 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 32 Objects with 1 Devices 22 Methods 3 Regions
 tbxface-0621 [02] TbLoadNamespace       : ACPI Tables successfully acquired
evxfevnt-0162 [02] Enable                : System is already in ACPI mode
cpu0 at mainbus0 apid 0cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
: Intel 686-class, 2494MHz, id 0x206a7
cpu0: idle lwp at 0xcc628c80, idle sp at 0xcc61fd28
ioapic0 at mainbus0 apid 1: pa 0xfec00000, virtual wire mode, version 11, 48 
pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <   Xen,     HVM,00000000>, AslId <HVML,00000000>
evxfevnt-0162 [02] Enable                : System is already in ACPI mode
mpacpi: found root PCI bus 0 at level 1
mpacpi: 1 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (0/0)
mpacpi: ISA interrupt override 5 -> 5 (3/3)
mpacpi: ISA interrupt override 10 -> 10 (3/3)
mpacpi: ISA interrupt override 11 -> 11 (3/3)
mpacpi: configuring PCI bus 0 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 20 attached to pci0 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 1 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 1 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 1 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 24 attached to pci0 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 25 attached to pci0 device 2 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 26 attached to pci0 device 2 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 27 attached to pci0 device 2 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 28 attached to pci0 device 3 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 29 attached to pci0 device 3 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 30 attached to pci0 device 3 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 31 attached to pci0 device 3 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 32 attached to pci0 device 4 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 33 attached to pci0 device 4 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 34 attached to pci0 device 4 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 35 attached to pci0 device 4 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 36 attached to pci0 device 5 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 37 attached to pci0 device 5 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 38 attached to pci0 device 5 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 39 attached to pci0 device 5 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 40 attached to pci0 device 6 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 41 attached to pci0 device 6 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 42 attached to pci0 device 6 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 43 attached to pci0 device 6 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 44 attached to pci0 device 7 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 45 attached to pci0 device 7 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 46 attached to pci0 device 7 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 47 attached to pci0 device 7 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 8 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 8 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 8 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 9 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 9 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 9 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 24 attached to pci0 device 9 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 25 attached to pci0 device 10 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 26 attached to pci0 device 10 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 27 attached to pci0 device 10 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 28 attached to pci0 device 10 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 29 attached to pci0 device 11 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 30 attached to pci0 device 11 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 31 attached to pci0 device 11 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 32 attached to pci0 device 11 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 33 attached to pci0 device 12 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 34 attached to pci0 device 12 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 35 attached to pci0 device 12 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 36 attached to pci0 device 12 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 37 attached to pci0 device 13 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 38 attached to pci0 device 13 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 39 attached to pci0 device 13 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 40 attached to pci0 device 13 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 41 attached to pci0 device 14 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 42 attached to pci0 device 14 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 43 attached to pci0 device 14 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 44 attached to pci0 device 14 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 45 attached to pci0 device 15 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 46 attached to pci0 device 15 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 47 attached to pci0 device 15 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 15 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 16 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 16 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 16 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 16 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 17 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 17 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 24 attached to pci0 device 17 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 25 attached to pci0 device 17 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 26 attached to pci0 device 18 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 27 attached to pci0 device 18 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 28 attached to pci0 device 18 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 29 attached to pci0 device 18 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 30 attached to pci0 device 19 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 31 attached to pci0 device 19 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 32 attached to pci0 device 19 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 33 attached to pci0 device 19 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 34 attached to pci0 device 20 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 35 attached to pci0 device 20 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 36 attached to pci0 device 20 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 37 attached to pci0 device 20 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 38 attached to pci0 device 21 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 39 attached to pci0 device 21 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 40 attached to pci0 device 21 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 41 attached to pci0 device 21 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 42 attached to pci0 device 22 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 43 attached to pci0 device 22 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 44 attached to pci0 device 22 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 45 attached to pci0 device 22 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 46 attached to pci0 device 23 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 47 attached to pci0 device 23 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 23 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 23 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 24 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 24 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 24 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 24 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 25 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 24 attached to pci0 device 25 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 25 attached to pci0 device 25 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 26 attached to pci0 device 25 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 27 attached to pci0 device 26 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 28 attached to pci0 device 26 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 29 attached to pci0 device 26 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 30 attached to pci0 device 26 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 31 attached to pci0 device 27 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 32 attached to pci0 device 27 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 33 attached to pci0 device 27 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 34 attached to pci0 device 27 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 35 attached to pci0 device 28 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 36 attached to pci0 device 28 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 37 attached to pci0 device 28 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 38 attached to pci0 device 28 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 39 attached to pci0 device 29 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 40 attached to pci0 device 29 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 41 attached to pci0 device 29 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 42 attached to pci0 device 29 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 43 attached to pci0 device 30 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 44 attached to pci0 device 30 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 45 attached to pci0 device 30 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 46 attached to pci0 device 30 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 47 attached to pci0 device 31 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
evgpeblk-1111 [18] EvCreateGpeBlock      : GPE 00 to 1F [_GPE] 4 regs on int 0x9
ioapic0: int9 a060<vector=60,delmode=0,actlo,level,dest=0> 0<target=0>
evgpeblk-1211 [21] EvInitializeGpeBlock  : Found 2 Wake, Enabled 7 Runtime GPEs 
in this block
Completing Region/Field/Buffer/Package 
initialization:...............................................
Initialized 14/20 Regions 3/3 Fields 21/21 Buffers 9/13 Packages (528 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 80 objects)
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
hpet1 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet1" frequency 62500000 Hz quality 2000
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
LTP1 (PNP0400) [Standard LPT printer port] at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Hewlett-Packard, LIon, Primary 22327 2011/10/14
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
WMID (PNP0C14) at acpi0 not configured
acpitz0 at acpi0 (THM):, passive cooling
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
ioapic0: int1 61<vector=61,delmode=0,dest=0> 0<target=0>
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
rnd: pckbd0 attached as an entropy source (collecting)
pms0 at pckbc2 (aux slot)
ioapic0: int12 62<vector=62,delmode=0,dest=0> 0<target=0>
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
rnd: pms0 attached as an entropy source (collecting)
pci0 at mainbus0 bus 0
pci0: PCI bus configuration mode 1 (all devs 0-32)
mainbus0: added to list as MPACPI pba bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371SB (PIIX3) PCI-ISA Bridge (rev. 0x00)
piixide0 at pci0 dev 1 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
ioapic0: int14 63<vector=63,delmode=0,dest=0> 0<target=0>
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
ioapic0: int15 64<vector=64,delmode=0,dest=0> 0<target=0>
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixpm0 at pci0 dev 1 function 3
piixpm0: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x01)
piixpm0: SMBus disabled
vga1 at pci0 dev 2 function 0: unknown vendor 0x1234 product 0x1111 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
XenSource, Inc. Xen Platform Device (undefined subclass 0x80, revision 0x01) at 
pci0 dev 4 function 0 not configured
XenSource, Inc. product 0xc110 (miscellaneous input, revision 0x01) at pci0 dev 
5 function 0 not configured
re0 at pci0 dev 6 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
ioapic0: int40 a065<vector=65,delmode=0,actlo,level,dest=0> 0<target=0>
re0: interrupting at ioapic0 pin 40
re0: Ethernet address 06:c3:30:6d:f0:59
re0: using 64 tx descriptors
rlphy0 at re0 phy 0: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re1 at pci0 dev 7 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
ioapic0: int44 a066<vector=66,delmode=0,actlo,level,dest=0> 0<target=0>
re1: interrupting at ioapic0 pin 44
re1: Ethernet address fa:fb:f5:8e:5d:8a
re1: using 64 tx descriptors
rlphy1 at re1 phy 0: Realtek internal PHY
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
auich0 at pci0 dev 8 function 0: i82801AA (ICH) AC-97 Audio
ioapic0: int17 a067<vector=67,delmode=0,actlo,level,dest=0> 0<target=0>
auich0: interrupting at ioapic0 pin 17
auich0: ac97: SigmaTel STAC9700 codec; no 3D stereo
auich0: ac97: ext id 809<AC97_23,VRM,VRA>
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
ioapic0: int7 68<vector=68,delmode=0,dest=0> 0<target=0>
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
ioapic0: int4 81<vector=81,delmode=0,dest=0> 0<target=0>
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: int6 69<vector=69,delmode=0,dest=0> 0<target=0>
isapnp0: no ISA Plug 'n Play devices found
Initializing SSP:aef25de4 4ed5f835 c393bcf9 e42654e3 bb26a2b0 ddf4fccf 9a81e8ac 
541a030e 
timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0
timecounter: Timecounter "TSC" frequency 2494634890 Hz quality 3000
auich0: measured ac97 link rate at 46892 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
acpiacad0: AC adapter online.
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <XenClient DVD-ROM, QM00002, 0.10.2> cdrom removable
rnd: cd0 attached as an entropy source (collecting)
cd0: 32-bit data port
wd0 at atabus0 drive 0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 80000 MB, 162539 cyl, 16 head, 63 sec, 512 bytes/sect x 163840000 sectors
rnd: wd0 attached as an entropy source (collecting)
IPsec: Initialized Security Association Processing.
wd0: 32-bit data port
wd0(piixide0:0:0): using PIO mode 0
cd0(piixide0:0:1): using PIO mode 3
atapibus1 at atabus1: 2 targets
cd1 at atapibus1 drive 0: <XenClient DVD-ROM, QM00003, 0.10.2> cdrom removable
rnd: cd1 attached as an entropy source (collecting)
cd1: 32-bit data port
cd1(piixide0:1:0): using PIO mode 3
Kernelized RAIDframe activated
Too many symbols for tree, skipping 11 symbols
swwdog0: software watchdog initialized
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
dump_misc_init: max_paddr = 0x80000000
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
clock: unknown CMOS layout
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout


# envstat -r
                     Current  CritMax  CritMin  CritCap     Unit
[acpiacad0]
       connected:         ON
[acpibat0]
         present:         ON
      design cap:      5.376                                  Ah
   last full cap:      5.376                                  Ah
      technology:          1
  design voltage:     11.100                                   V
        warn cap:      0.200                                  Ah  ( 3.72%)
         low cap:      0.100                                  Ah  ( 1.86%)
         voltage:     12.717                                   V
     charge rate:        N/A
  discharge rate:        N/A
          charge:      5.238                                  Ah  (97.43%)
        charging:        OFF
    charge state:     NORMAL
[acpibat1]
         present:        OFF
      design cap:      0.000                                  Wh
   last full cap:      0.000                                  Wh
      technology:          0
  design voltage:      0.000                                   V
        warn cap:      0.000                                  Wh
         low cap:      0.000                                  Wh
         voltage:      0.000                                   V
     charge rate:      0.000                                   W
  discharge rate:      0.000                                   W
          charge:      0.000                                  Wh
        charging:        OFF
    charge state:    UNKNOWN
[acpitz0]
     temperature:   -267.400                                degC

Attachment: pgpRw8VrsPqpR.pgp
Description: PGP signature



Home | Main Index | Thread Index | Old Index