Port-i386 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: success updating wm(4) in netbsd-5 for i82579 (& i82577)



Success!  I finally have the HP EliteBook 8460p on the network!

At Thu, 22 Dec 2011 09:49:59 -0800, buhrow%lothlorien.nfbcal.org@localhost 
(Brian Buhrow) wrote:
Subject: Re: (vainly?) attempting to back-port wm(4) to netbsd-5....
> 
> 2.  It looks like support for various 82577 chips is already in the
> netbsd-5 tree, meaning you should be able to easily get your 82577 variants
> working just by adding their product IDs to the driver in the latest
> netbsd-5 if_wm.c sources.

I back-ported sys/dev/mii/ihphy.c for the Intel 82577 -- it works well.

> 3.  Once you have the 82577 chips working, then you can concentrate on
> getting the 82579 chips working.

In the end it was sufficient to pull up the following change, and simply
ignore the patch hunks which didn't merge:

----------------------------
revision 1.221
date: 2011/05/20 00:57:42;  author: msaitoh;  state: Exp;  lines: +155 -23
- Add PCH2 support.
  - Add 82579 support.
  - Change PBA size for PCH from 10K to 26K as FreeBSD's em-7.1.7
- Add yet another 82567V support.
- Add ICH10+HANKSVILL support.
- Add 82580 quad-1000BaseX support.
----------------------------


as well as to copy sys/dev/pci/if_wm*.h


Attached is the dmesg....


Sadly it too crashes with a LOCKDEBUG problem under load....


-- 
                                                Greg A. Woods
                                                Planix, Inc.

<woods%planix.com@localhost>       +1 250 762-7675        http://www.planix.com/




Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_STABLE (GENERIC) #7: Mon Jan 23 15:37:57 PST 2012
        
woods@once:/rest/build/woods/once/netbsd-5-i386-i386-ppro-obj/rest/work/woods/m-NetBSD-5/sys/arch/i386/compile/GENERIC
total memory = 3014 MB
avail memory = 2948 MB
buf_memcalc: bufcache is preset to 5%
buf_memcalc: bufmem calculated to be to 158035968 bytes
nbuf (bufhashtbl size) = 51444
rnd: initialised (4096) with counter
timecounter: Timecounters tick every 1.000 msec
RTC BIOS diagnostic error 9d<clock_battery,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP EliteBook 8460p (A0001D02)
mainbus0 (root)
mainbus0: scanning 0x9ec00 to 0x9eff0 for MP signature
mainbus0: scanning 0x9e800 to 0x9ebf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
Parsing all Control Methods:
Table [DSDT](id 0001) - 2099 Objects with 107 Devices 606 Methods 47 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 22 Objects with 5 Devices 7 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 15 Objects with 1 Devices 5 Methods 1 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 9 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 43 Objects with 0 Devices 28 Methods 0 Regions
 tbxface-0621 [02] TbLoadNamespace       : ACPI Tables successfully acquired
evxfevnt-0176 [08] Enable                : Transition to ACPI mode successful
cpu0 at mainbus0 apid 
0/rest/work/woods/m-NetBSD-5/sys/arch/x86/x86/mtrr_i686.c: FIXME: more than 8 
MTRRs
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
: Intel 686-class, 2494MHz, id 0x206a7
cpu0: idle lwp at 0xcd6c8c80, idle sp at 0xdb084d28
cpu1 at mainbus0 apid 1: Intel 686-class, 2494MHz, id 0x206a7
cpu1: idle lwp at 0xcd6d4cc0, idle sp at 0xdb44dd28
cpu2 at mainbus0 apid 2: Intel 686-class, 2494MHz, id 0x206a7
cpu2: idle lwp at 0xcd6d6ce0, idle sp at 0xdb480d28
cpu3 at mainbus0 apid 3: Intel 686-class, 2494MHz, id 0x206a7
cpu3: idle lwp at 0xcd6d8d00, idle sp at 0xdb4bad28
ioapic0 at mainbus0 apid 0: pa 0xfec00000, virtual wire mode, version 20, 24 
pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,0000000f>, AslId <    ,01000013>
evxfevnt-0162 [12] Enable                : System is already in ACPI mode
mpacpi: found root PCI bus 0 at level 1
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: found subordinate bus 3 at level 2
mpacpi: found subordinate bus 4 at level 2
mpacpi: found subordinate bus 5 at level 2
mpacpi: 6 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (0/0)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 4 int routing
mpacpi: configuring PCI bus 5 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act 
Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 31 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 31 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 26 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 27 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 25 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 22 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 22 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 22 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 22 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 4 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 4 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 4 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 4 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 6 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 6 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 6 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 6 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci1 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci1 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci1 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci2 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci2 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci2 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci3 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci3 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci3 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci4 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci4 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci4 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci4 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci5 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci5 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci5 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci5 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
evgpeblk-1111 [28] EvCreateGpeBlock      : GPE 00 to 3F [_GPE] 8 regs on int 0x9
ioapic0: int9 8060<vector=60,delmode=0,level,dest=0> 0<target=0>
evgpeblk-1211 [31] EvInitializeGpeBlock  : Found 4 Wake, Enabled 6 Runtime GPEs 
in this block
Completing Region/Field/Buffer/Package 
initialization:........................................................................................................................................................................................................................
Initialized 37/48 Regions 0/0 Fields 87/87 Buffers 92/101 Packages (2197 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..[ACPI 
Debug]  String [0x13] "GFX DockEvent Enter"
[ACPI Debug]  String [0x0B] "Dock Status"
[ACPI Debug]  Integer 0x0000000000000000
[ACPI Debug]  String [0x12] "GFX DockEvent Exit"
[ACPI Debug]  Integer 0x00000000000000FD
....
Executed 6 _INI methods requiring 2 _STA executions (examined 131 objects)
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpi_activate_device: PNP0C0F, old status=9
acpi: activated PNP0C0F
acpi_activate_device: PNP0C0F, new status=b
acpi_activate_device: PNP0C0F, old status=9
acpi: activated PNP0C0F
acpi_activate_device: PNP0C0F, new status=b
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
FWHD (INT0800) [Intel FWH Random Number Generator] at acpi0 not configured
GTPM (IFX0102) at acpi0 not configured
hpet1 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet1" frequency 14318179 Hz quality 2000
npx1 at acpi0 (MATH, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
LPT0 (PNP0401) [ECP printer port] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN017B) (aux port): irq 12
ACEL (HPQ0004) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Hewlett-Packard, LIon, Primary 22327 2011/10/14
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpidalb0 at acpi0 (HST1, PNP0C32-1): Direct Application Launch Button
WMID (PNP0C14) at acpi0 not configured
acpitz0 at acpi0 (CPUZ): critical 128.0C hot 99.0C, passive cooling
acpitz1 at acpi0 (GFXZ): critical 128.0C passive 0.0C, passive cooling
acpitz2 at acpi0 (EXTZ): critical 128.0C, passive cooling
acpitz3 at acpi0 (LOCZ): critical 128.0C, passive cooling
acpitz4 at acpi0 (BATZ): critical 128.0C passive 28.0C, passive cooling
acpitz5 at acpi0 (PCHZ): critical 128.0C, passive cooling
acpitz6 at acpi0 (DM1Z): critical 128.0C, passive cooling
acpitz7 at acpi0 (DM2Z): critical 128.0C, passive cooling
pckbd0 at pckbc1 (kbd slot)
ioapic0: int1 61<vector=61,delmode=0,dest=0> 0<target=0>
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
rnd: pckbd0 attached as an entropy source (collecting)
pms0 at pckbc1 (aux slot)
ioapic0: int12 62<vector=62,delmode=0,dest=0> 0<target=0>
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
rnd: pms0 attached as an entropy source (collecting)
pci0 at mainbus0 bus 0
pci0: PCI bus configuration mode 1 (all devs 0-32)
mainbus0: added to list as MPACPI pba bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel Sandy Bridge (mobile) Host Bridge (rev. 0x09)
vga1 at pci0 dev 2 function 0: Intel Sandy Bridge (mobile) GT2+ Integrated 
Graphics Device (rev. 0x09)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
Intel 6 Series Chipset Family Management Engine Interface (miscellaneous 
communications, revision 0x04) at pci0 dev 22 function 0 not configured
Intel 6 Series Chipset Family Active Management Technology - SOL (serial 
communications, interface 0x02, revision 0x04) at pci0 dev 22 function 3 not 
configured
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller, rev. 4
ioapic0: int20 a063<vector=63,delmode=0,actlo,level,dest=0> 0<target=0>
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address e4:11:5b:24:ed:d4
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
rnd: wm0 attached as an entropy source (off)
ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB Host 
Controller 2 (rev. 0x04)
ioapic0: int16 a064<vector=64,delmode=0,actlo,level,dest=0> 0<target=0>
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
ioapic0: int22 a065<vector=65,delmode=0,actlo,level,dest=0> 0<target=0>
azalia0: interrupting at ioapic0 pin 22
azalia0: host: Intel 6 Series Chipset Family HD Audio (rev. 4), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCI Express Root 
Port 1 (rev. 0xb4)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1

ppb0: added to list as MPACPI pba bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 6 Series Chipset Family PCI Express Root 
Port 2 (rev. 0xb4)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2

ppb1: added to list as MPACPI pba bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: Intel 6 Series Chipset Family PCI Express Root 
Port 3 (rev. 0xb4)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3

ppb2: added to list as MPACPI pba bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci3 dev 0 function 0: JMicron Technology JMB38X IEEE 1394 Host 
Controller (rev. 0x30)
ioapic0: int18 a066<vector=66,delmode=0,actlo,level,dest=0> 0<target=0>
fwohci0: interrupting at ioapic0 pin 18
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 ff:e4:73:ff:ff:ff:ff:fe
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=100, retry=100
fwohci0: fwphy_rddata: 0x2 loop=100, retry=100
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
JMicron Technology JMB388 SD/MMC Host Controller (miscellaneous system, 
revision 0x30) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2: JMicron Technology JMB388 SD Host Controller 
(rev. 0x30)
ioapic0: int18 a066<vector=66,delmode=0,actlo,level,dest=0> 0<target=0>
sdhc0: interrupting at ioapic0 pin 18
sdmmc0 at sdhc0
ppb3 at pci0 dev 28 function 3: Intel 6 Series Chipset Family PCI Express Root 
Port 4 (rev. 0xb4)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 4

ppb3: added to list as MPACPI pba bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
Intel Centrino Advanced-N 6205 WiFi (miscellaneous network, revision 0x34) at 
pci4 dev 0 function 0 not configured
ppb4 at pci0 dev 28 function 7: Intel 6 Series Chipset Family PCI Express Root 
Port 8 (rev. 0xb4)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 5

ppb4: added to list as MPACPI pba bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
NEC Renesas Electronics USB 3.0 Host Controller (USB serial bus, interface 
0x30, revision 0x04) at pci5 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB Host 
Controller 1 (rev. 0x04)
ioapic0: int16 b064<vector=64,delmode=0,pending,actlo,level,dest=0> 0<target=0>
ehci1: interrupting at ioapic0 pin 16
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0
pcib0: Intel QM67 LPC (rev. 0x04)
ahcisata0 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 2
ioapic0: int19 a067<vector=67,delmode=0,actlo,level,dest=0> 0<target=0>
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xef30e060
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 3
atabus3 at ahcisata0 channel 4
atabus4 at ahcisata0 channel 5
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
ioapic0: int7 68<vector=68,delmode=0,dest=0> 0<target=0>
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
Initializing SSP:c7b75612 8160c875 78279e07 4f9a3fe4 a007d377 9afe73ef fef9dcd9 
b2a9d652 
timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: timer0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu2: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu2: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: timer0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu3: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu3: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
timecounter: Timecounter "TSC" frequency 2494441800 Hz quality 3000
azalia0: codec[0]: 0x111d/0x7605 (rev. 1.5), HDA rev. 1.0
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0), HDA rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
azalia0: codec[3]: 0x8086/0x2805 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
uhub0 at usb0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub1 at usb1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0: <TOSHIBA MK3261GSYN>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
rnd: wd0 attached as an entropy source (collecting)
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp      DVD A  DS8A5LH, 110290029751, 1H68> cdrom 
removable
rnd: cd0 attached as an entropy source (collecting)
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
uhub2 at uhub0 port 1: Intel Integrated Rate Matching USB Hub, class 9/0, rev 
2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub1 port 1: Intel Integrated Rate Matching USB Hub, class 9/0, rev 
2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
ugen0 at uhub2 port 1
ugen0: Validity Sensors, Inc. VFS471 Fingerprint Reader, rev 1.10/0.86, addr 3
uvideo0 at uhub3 port 4 configuration 1 interface 0: Chicony Electronics Co., 
Ltd. HP HD Webcam [Fixed], rev 2.00/99.89, addr 3
video0 at uvideo0: Chicony Electronics Co., Ltd. HP HD Webcam [Fixed], rev 
2.00/99.89, addr 3
ugen1 at uhub2 port 2
ugen1: Sierra Wireless Inc HP un2430 Mobile Broadband Module, rev 2.00/0.02, 
addr 4
ubt0 at uhub3 port 6
ubt0: Broadcom Corp HP Integrated Module, rev 2.00/3.06, addr 4
Kernelized RAIDframe activated
swwdog0: software watchdog initialized
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
dump_misc_init: max_paddr = 0xbd000000
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)

Attachment: pgp3_ScsBWXkg.pgp
Description: PGP signature



Home | Main Index | Thread Index | Old Index