dmesg output from sun ultra40m2 & ultra20m2

To: port-i386%netbsd.org@localhost
Subject: dmesg output from sun ultra40m2 & ultra20m2
From: "Darren Reed" <darrenr%netbsd.org@localhost>
Date: Sun, 21 Mar 2010 03:47:20 +0100
someone told me to send this somewhere useful... dunno if this counts as
useful :*)
... or maybe that was the ultra 20... so the ultra20m2 output is below
the ultra40m2.

anyway, my notes on -current running on this ultra 40 are:

nfe0/nfe1 - can receive fine but sending does not seem to work (unless
there is some other reason why DHCP fails on nfe0/1 but works on hme1,
for example)

the power control for the cpu doesn't seem to drop it such that the fan
goes into "quiet mode"

the 4 hme's come from a pci qfe card

there are a number of devices that probe as "not configured"

"envstat" seems to work

is anyone working on TPM code?

Darren

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.24 (GENERIC) #0: Thu Feb 18 23:46:28 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201002190000Z-obj/home/bu
ilds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 2494 MB
avail memory = 2440 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sun Microsystems Sun Ultra 40 M2 Workstation (11)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 3000MHz, id 0x40f13
cpu1 at mainbus0 apid 1: AMD 686-class, 3000MHz, id 0x40f13
cpu2 at mainbus0 apid 2: AMD 686-class, 3000MHz, id 0x40f13
cpu3 at mainbus0 apid 3: AMD 686-class, 3000MHz, id 0x40f13
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xb7200000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
hpet0 at acpi0 (MMTM, PNP0103-0): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
attimer1 at acpi0 (PIT0, PNP0100): io 0x40-0x43
pcppi1 at acpi0 (SPK0, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (MTH0, PNP0C04): io 0xf0-0xf1 irq 13
npx1: reported by CPUID; using exception 16
TPM (IFX0102) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci0 dev 0
function 0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0364 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0368 (rev.
0xa3)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x036c (rev. 0xa1)
ohci0: interrupting at ioapic0 pin 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x036d (rev. 0xa2)
ehci0: interrupting at ioapic0 pin 7
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 4 function 0: NVIDIA MCP55 IDE Controller (rev.
0xa1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 5 function 0: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using ioapic0 pin 10 for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
viaide2 at pci0 dev 5 function 1: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
viaide2: using ioapic0 pin 10 for native-PCI interrupt
atabus3 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus4 at viaide2 channel 1
ppb0 at pci0 dev 6 function 0: vendor 0x10de product 0x0370 (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 6 function 0: vendor 0x8086 product 0xb154 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vendor 0x108e product 0x1000 (miscellaneous bridge, revision 0x01) at
pci2 dev 0 function 0 not configured
hme0 at pci2 dev 0 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ioapic0 pin 11
hme0: Ethernet address 08:00:20:e9:c7:d8
ukphy0 at hme0 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x108e product 0x1000 (miscellaneous bridge, revision 0x01) at
pci2 dev 1 function 0 not configured
hme1 at pci2 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ioapic0 pin 10
hme1: Ethernet address 08:00:20:e9:c7:d9
ukphy1 at hme1 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x108e product 0x1000 (miscellaneous bridge, revision 0x01) at
pci2 dev 2 function 0 not configured
hme2 at pci2 dev 2 function 1: Sun Happy Meal Ethernet, rev. 1
hme2: interrupting at ioapic0 pin 10
hme2: Ethernet address 08:00:20:e9:c7:da
ukphy2 at hme2 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x108e product 0x1000 (miscellaneous bridge, revision 0x01) at
pci2 dev 3 function 0 not configured
hme3 at pci2 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1
hme3: interrupting at ioapic0 pin 5
hme3: Ethernet address 08:00:20:e9:c7:db
ukphy3 at hme3 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci1 dev 8 function 0: vendor 0x104c product 0x8023 (rev.
0x00)
fwohci0: interrupting at ioapic0 pin 10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:20:14:40:02:0d:60
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
hdaudio0 at pci0 dev 6 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 11
hdafg0 at hdaudio0 vendor 0x10EC product 0x0885 nid 0x01 (firmware
configuration)
hdafg0: DAC0:02, Analog Speaker: Jack (Green, 14)
hdafg0: DAC0:03, Analog Speaker: Jack (Orange, 16)
hdafg0: DAC0:04, Analog Speaker: Jack (Black, 15)
hdafg0: DAC0:05, Analog Speaker: Jack (Grey, 17)
hdafg0: DAC1:25, Analog HP Out: Jack (Green, 1B)
hdafg0: DAC2:06, Digital SPDIF Out: Jack (Green, 1E)
hdafg0: ADC3:07, Analog Mic In: Jack (Pink, 18)
hdafg0: ADC3:07, Analog Line In: Jack (Blue, 1A)
hdafg0: ADC3:07, Analog Line In: Fixed Function (Unknown, 1D)
hdafg0: ADC3:07, Analog CD: Fixed Function (Unknown, 1C)
hdafg0: ADC4:08, Analog Mic In: Jack (Pink, 19)
hdafg0: ADC5:0A, Digital SPDIF In: Jack (Pink, 1F)
hdafg0: 8ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
ppb2 at pci0 dev 10 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mpt0 at pci3 dev 0 function 0: vendor 0x1000 product 0x0058
mpt0: interrupting at ioapic0 pin 11
mpt0: Phy 0: Link Rate 3.0 Gbps
mpt0: Phy 1: Link Rate 3.0 Gbps
mpt0: Phy 2: Link Rate 3.0 Gbps
scsibus0 at mpt0: 63 targets, 8 luns per target
ppb3 at pci0 dev 11 function 0: vendor 0x10de product 0x0374 (rev. 0xa3)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
ppb4 at pci0 dev 12 function 0: vendor 0x10de product 0x0374 (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 13 function 0: vendor 0x10de product 0x0378 (rev. 0xa3)
pci6 at ppb5 bus 6
pci6: no spaces enabled!
ppb6 at pci0 dev 14 function 0: vendor 0x10de product 0x0375 (rev. 0xa3)
pci7 at ppb6 bus 7
pci7: no spaces enabled!
ppb7 at pci0 dev 15 function 0: vendor 0x10de product 0x0377 (rev. 0xa3)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev.
0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev.
0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev.
0x00)
amdtemp0 at pci0 dev 24 function 3: AMD CPU Temperature Sensors (K8:
core rev JH-F3, socket F)
pchb3 at pci0 dev 25 function 0: vendor 0x1022 product 0x1100 (rev.
0x00)
pchb4 at pci0 dev 25 function 1: vendor 0x1022 product 0x1101 (rev.
0x00)
pchb5 at pci0 dev 25 function 2: vendor 0x1022 product 0x1102 (rev.
0x00)
amdtemp1 at pci0 dev 25 function 3: AMD CPU Temperature Sensors (K8:
core rev JH-F3, socket F)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using
wskbd0
wsmux1: connecting to wsdisplay0
pci9 at mainbus0 bus 128
pci9: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci9 dev 0
function 0 not configured
vendor 0x10de product 0x0361 (RAM memory, revision 0xa3) at pci9 dev 1
function 0 not configured
nfsmbc1 at pci9 dev 1 function 1: vendor 0x10de product 0x0368 (rev.
0xa3)
nfsmb2 at nfsmbc1 SMBus 1
iic2 at nfsmb2: I2C bus
nfsmb3 at nfsmbc1 SMBus 2
iic3 at nfsmb3: I2C bus
viaide3 at pci9 dev 5 function 0: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide3: bus-master DMA support present
viaide3: primary channel wired to native-PCI mode
LTID: Picked IRQ 40 with weight 0
viaide3: using ioapic1 pin 16 for native-PCI interrupt
atabus5 at viaide3 channel 0
viaide3: secondary channel wired to native-PCI mode
atabus6 at viaide3 channel 1
viaide4 at pci9 dev 5 function 1: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide4: bus-master DMA support present
viaide4: primary channel wired to native-PCI mode
LSI1: Picked IRQ 41 with weight 0
viaide4: using ioapic1 pin 17 for native-PCI interrupt
atabus7 at viaide4 channel 0
viaide4: secondary channel wired to native-PCI mode
atabus8 at viaide4 channel 1
nfe0 at pci9 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMAC: Picked IRQ 42 with weight 0
nfe0: interrupting at ioapic1 pin 18
nfe0: Ethernet address 00:14:4f:9b:bb:d0
makphy0 at nfe0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe1 at pci9 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMA2: Picked IRQ 43 with weight 0
nfe1: interrupting at ioapic1 pin 19
nfe1: Ethernet address 00:14:4f:9b:bb:d1
makphy1 at nfe1 phy 3: Marvell 88E1149 Gigabit PHY, rev. 1
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb8 at pci9 dev 10 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
pci10 at ppb8 bus 129
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x10de product 0x029d (VGA display, revision 0xa1) at pci10 dev 0
function 0 not configured
ppb9 at pci9 dev 11 function 0: vendor 0x10de product 0x0374 (rev. 0xa3)
pci11 at ppb9 bus 130
pci11: no spaces enabled!
ppb10 at pci9 dev 12 function 0: vendor 0x10de product 0x0374 (rev.
0xa3)
pci12 at ppb10 bus 131
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
ppb11 at pci9 dev 13 function 0: vendor 0x10de product 0x0378 (rev.
0xa3)
pci13 at ppb11 bus 132
pci13: no spaces enabled!
ppb12 at pci9 dev 14 function 0: vendor 0x10de product 0x0375 (rev.
0xa3)
pci14 at ppb12 bus 133
pci14: no spaces enabled!
ppb13 at pci9 dev 15 function 0: vendor 0x10de product 0x0377 (rev.
0xa3)
pci15 at ppb13 bus 134
pci15: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
fwohci0: unrecoverable error
fwohci0: unrecoverable error
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1
uhub1: 10 ports with 10 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-85JS, , F100> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA)
uhub2 at uhub1 port 7: vendor 0x0424 product 0x2504, class 9/0, rev
2.00/0.01, addr 2
uhub2: multiple transaction translators
uhub2: 4 ports with 4 removable, self powered
sd0 at scsibus0 target 0 lun 0: <ATA, HITACHI HUA7250S, AC5A> disk fixed
sd0: 465 GB, 476941 cyl, 16 head, 127 sec, 512 bytes/sect x 976773168
sectors
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST314655SSUN146G, 0791> disk
fixed
sd1: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329
sectors
sd1: GPT GUID: 79a12545-75b3-39ca-8461-c1d87a276b0d
dk0 at sd1: zfs
dk0: 286722656 blocks at 256, type:
dk1 at sd1: bda8fbc8-3efd-9a66-a11e-ee5a51b29d1d
dk1: 16384 blocks at 286722912, type:
sd2 at scsibus0 target 2 lun 0: <SEAGATE, ST314655SSUN146G, 0791> disk
fixed
sd2: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329
sectors
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0005, rev 1.00/1.02, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
fwohci0: unrecoverable error


Ultra 20

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005,
   2006, 2007, 2008, 2009, 2010
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 5.99.24 (GENERIC) #0: Thu Feb 18 23:46:28 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201002190000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 3326 MB
avail memory = 3258 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sun Microsystems  Ultra20 M2 (1.52 )
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 1800MHz, id 0x40f32
cpu1 at mainbus0 apid 1: AMD 686-class, 1800MHz, id 0x40f32
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (PIT0, PNP0100): io 0x40-0x43
pcppi1 at acpi0 (SPK0, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (MTH0, PNP0C04): io 0xf0-0xf1 irq 13
npx1: reported by CPUID; using exception 16
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci0 dev 0
function 0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0364 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0368 (rev.
0xa3)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x036c (rev. 0xa1)
LUS0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x036d (rev. 0xa2)
LUS2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 4 function 0: NVIDIA MCP55 IDE Controller (rev.
0xa1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 5 function 0: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LTID: Picked IRQ 22 with weight 0
viaide1: using ioapic0 pin 22 for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
viaide2 at pci0 dev 5 function 1: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
LSI1: Picked IRQ 23 with weight 0
viaide2: using ioapic0 pin 23 for native-PCI interrupt
atabus3 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus4 at viaide2 channel 1
ppb0 at pci0 dev 6 function 0: vendor 0x10de product 0x0370 (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fwohci0 at pci1 dev 6 function 0: vendor 0x1106 product 0x3044 (rev.
0x80)
LNK3: Picked IRQ 16 with weight 0
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:20:14:40:03:19:d4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppb1 at pci1 dev 9 function 0: vendor 0x1011 product 0x0024 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
tlp0 at pci2 dev 4 function 0: DECchip 21143 Ethernet, pass 2.1
LNK2: Picked IRQ 17 with weight 0
tlp0: interrupting at ioapic0 pin 17
tlp0: Adaptec ANA-6922, Ethernet address 00:00:d1:1c:41:e4
nsphy0 at tlp0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci2 dev 8 function 0: DECchip 21143 Ethernet, pass 2.1
tlp1: sharing interrupt with tlp0
tlp1: Adaptec ANA-6922, Ethernet address 00:00:d1:1c:41:e5
nsphy1 at tlp1 phy 1: DP83840 10/100 media interface, rev. 1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hdaudio0 at pci0 dev 6 function 1: HD Audio Controller
LAZA: Picked IRQ 20 with weight 1
hdaudio0: interrupting at ioapic0 pin 20
hdafg0 at hdaudio0 vendor 0x10EC product 0x0883 nid 0x01 (firmware
configuration)
hdafg0: DAC0:02, Analog Speaker: Jack (Green, 14)
hdafg0: DAC0:02, Analog HP Out: Jack (Green, 1B)
hdafg0: ADC1:08, Analog Mic In: Jack (Pink, 18)
hdafg0: ADC1:08, Analog Line In: Jack (Blue, 1A)
hdafg0: ADC1:08, Analog CD: Fixed Function (Unknown, 1C)
hdafg0: ADC1:08, Analog Line In: Fixed Function (Unknown, 1D)
hdafg0: ADC2:09, Analog Mic In: Jack (Pink, 19)
hdafg0: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
nfe0 at pci0 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMAC: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address 00:14:4f:70:97:3a
makphy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe1 at pci0 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMA2: Picked IRQ 22 with weight 1
nfe1: interrupting at ioapic0 pin 22
nfe1: Ethernet address 00:14:4f:70:97:3b
makphy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 10 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 11 function 0: vendor 0x10de product 0x0374 (rev. 0xa3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 12 function 0: vendor 0x10de product 0x0374 (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 13 function 0: vendor 0x10de product 0x0378 (rev. 0xa3)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 14 function 0: vendor 0x10de product 0x0375 (rev. 0xa3)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 15 function 0: vendor 0x10de product 0x0377 (rev. 0xa3)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci8 dev 0 function 0: vendor 0x10de product 0x039e (rev. 0xa1)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev.
0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev.
0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev.
0x00)
amdtemp0 at pci0 dev 24 function 3: AMD CPU Temperature Sensors (K8:
core rev JH-F2, socket AM2)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1
uhub1: 10 ports with 10 removable, self powered
atapibus0 at atabus0: 2 targets
viaide1 port 0: device present, speed: 3.0Gb/s
viaide1 port 1: device present, speed: 3.0Gb/s
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-H42N, K2B6C2M3828, RL00>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
DMA)
wd0 at atabus1 drive 0: <HITACHI HUA7250SBSUN500G 1001JYJG3F>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
DMA)
wd1 at atabus2 drive 0: <Hitachi HDT725050VLA360>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub0 port 3 configuration 1 interface 0
uhidev0: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10, rev
1.10/3.10, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1
uhidev1: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10, rev
1.10/3.10, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Prev by Date: Re: PAE without XEN?
Next by Date: [netbsd-5] machine losing time by the hour
Previous by Thread: PAE without XEN?
Next by Thread: [netbsd-5] machine losing time by the hour
Indexes:
Home | Main Index | Thread Index | Old Index