Port-i386 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: wm(4) problems



On Tue, Jan 29, 2008 at 01:42:13PM -0600, Rich Neswold wrote:
> wm0 at pci1 dev 6 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2
> wm0: interrupting at irq 9
> wm0: 32-bit 33MHz PCI bus
> wm0: 64 word (6 address bits) MicroWire EEPROM
> makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
> makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> 
> Has anyone else used this version (EM) and this PHY successfully?

Yes, I have on NetBSD-i386 ...

wm0 at pci2 dev 9 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2
wm0: interrupting at apic 2 int 21 (irq 9)
wm0: Ethernet address 00:07:e9:0e:b9:a8
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3

... and NetBSD-sparc64:

wm0 at pci1 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2
wm0: interrupting at ivec 1c
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:07:e9:0e:bb:33
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3

This is an Intel PRO/1000 MT Desktop Adapter which works fine with
NetBSD, or at least worked fine in the past. I haven't tested it
with NetBSD 4.0 because my server has an on-board GbE interface
and I can't use any PCI cards in my ULTRA60(*).

        Kind regards

(*) http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=30343

-- 
Matthias Scheler                                  http://zhadum.org.uk/



Home | Main Index | Thread Index | Old Index