Subject: Xbox dmesg output.
To: None <>
From: Andrew Gillham <>
List: port-i386
Date: 12/13/2006 13:59:07
On 12/12/06, *Andrew Gillham* < 
<>> wrote:

    Here are my issues at the moment:
    1) doesn't seem to try to go multi-user, even with boothowto =
    RB_AUTOBOOT in init_main.c, am I missing the obvious here?

Ok, this turned out to be a few problems.  Thanks tcpdump & wireshark.  
I had to lower the NFS_BOOT_RWSIZE  as the default 32k seems to  timeout 
on this usb ethernet dongle.  I then saw repeated accesses to 
/dev/console and /dev/constty so I just made them regular files and saw 
init complaining about being able to open the controlling tty for 
console.  Well I don't really have a /dev/console working. :)  So I 
commented out that check and booted with the new binary in place.  This 
got me into my xbox.

Now I need to get the rest of the issues sorted.


NetBSD 4.99.5 (XBOX) #0: Wed Dec 13 00:25:43 PST 2006
total memory = 33404 KB
avail memory = 30192 KB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 1
timecounter: Timecounter "i8254" frequency 1125000 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (Coppermine) (686-class), 733.38 MHz, id 0x68a
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: NVIDIA nVidia device 0x02a5 (rev. 0xa1)
agp at pchb0 not configured
NVIDIA product 0x02a6 (RAM memory, revision 0xa1) at pci0 dev 0 function 
3 not c
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA product 0x01b2 (rev. 0xb2)
NVIDIA product 0x01b4 (SMBus serial bus, revision 0xb1) at pci0 dev 1 
function 1
 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce USB (rev. 0xb1)
ohci0: interrupting at irq 1
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 3 function 0: NVIDIA nForce USB (rev. 0xb1)
ohci1: interrupting at irq 9
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
NVIDIA nForce Ethetnet (ethernet network, revision 0xb1) at pci0 dev 4 
0 not configured
NVIDIA product 0x01b0 (audio multimedia, revision 0xb1) at pci0 dev 5 
function 0
 not configured
auich0 at pci0 dev 6 function 0: nForce MCP AC-97 Audio
auich0: interrupting at irq 6
auich0: ac97: Wolfson unknown (0x574d4c09) codec; no 3D stereo
NVIDIA product 0x01c1 (modem communications, revision 0xb1) at pci0 dev 
6 functi
on 1 not configured
ppb0 at pci0 dev 8 function 0: NVIDIA product 0x01b8 (rev. 0xb1)
ppb0: not configured by system firmware
viaide0 at pci0 dev 9 function 0
viaide0: NVIDIA nForce IDE Controller (rev. 0xb1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
ppb1 at pci0 dev 30 function 0: NVIDIA product 0x01b7 (rev. 0xa1)
pci at ppb1 bus 1 not configured
isa0 at pcib0
attimer0 at isa0 port 0x40-0x43: AT Timer
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
x3lcd0 at isa0 port  iomem  irq  drq x3lcd0: 4x40 text-mode hd44780 LCD
x3lcd: ret 5x3lcd0: LCD not responding or unconnected
wsdisplay at x3lcd0 not configured
timecounter: Timecounter "TSC" frequency 733379500 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, independent
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <THOMSON-DVD, , 1.24> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <WDC WD80EB-28CGH2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 7633 MB, 15509 cyl, 16 head, 63 sec, 512 bytes/sect x 15633072 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub2 at uhub0 port 1
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub2: 4 ports with 4 removable, self powered
kue0 at uhub2 port 2
kue0: NETGEAR NETGEAR EA101 USB Ethernet Adapter, rev 1.00/0.02, addr 3
kue0: cold boot, downloading firmware
kue0: Ethernet address 00:XX:XX:XX:XX:XX
uhub3 at uhub2 port 3
uhub3: Microsoft product 0x0288, class 9/0, rev 1.10/1.21, addr 4
uhub3: 3 ports with 2 removable, bus powered
ugen0 at uhub3 port 1
ugen0: Microsoft product 0x0289, rev 1.10/1.21, addr 5
boot device: <unknown>
root on kue0
nfs_boot: trying DHCP/BOOTP