--dDRMvlgZJXvWKvBx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Tue, Aug 22, 2006 at 10:27:15AM +0100, Matthias Scheler wrote:
> On Tue, Aug 22, 2006 at 11:06:20AM +0200, Geert Hendrickx wrote:
> > could you please have a look at this PR [34184]? It is probably
> > caused by [pullup ticket] #1168:

> >         Add agp(4) support for Intel i915 chipset integrated graphics.
> >         This fixes PR port-i386/32550.
> >         [tron, ticket #1168]
> 
> It looks like that. I unfortunately don't have a system with an Intel i915
> chipset to debug this.
> 
> It would be interesting to know whether NetBSD 3.1_RC1 works fine for
> Michael Eriksson who submitted the original patch.

I have tried to boot some kernels on my HP nc6220 laptop, on which the
i915 AGP patches were originally developed.

Booting
ftp://ftp.netbsd.org/pub/NetBSD-daily/netbsd-3-1-RC1/200608202102Z/i386/binary/kernel/netbsd-GENERIC.gz
works perfectly. dmesg output from the boot, as well as from booting
the released 3.0 GENERIC kernel
ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-3.0/i386/binary/kernel/netbsd-GENERIC_LAPTOP.gz
is attached. (The sd0 stuff is the flash memories I used to boot from
and to store the dmesg output on.)

Booting GENERIC_LAPTOP hangs for both 3.0 and 3.1_RC1. The cause is
likely to be PCIBIOS related, but I haven't done further research as I
think it's unrelated to the problem at hand.

So: no regression on my HP nc6220 laptop.

/Micke

--dDRMvlgZJXvWKvBx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-3.0"

NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 484 MB
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1995.38 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 2.00GHz"
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 1500 MHz (1356 mV)
cpu0: Enhanced SpeedStep operating point not in table
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2590 (rev. 0x03)
vga1 at pci0 dev 2 function 0: Intel product 0x2592 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel product 0x2792 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci1 at ppb0 bus 16
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci1 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
bge0: interrupting at irq 10
bge0: ASIC BCM5751 A1 (0x4101), Ethernet address 00:14:38:1c:18:39
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel 82801FB/FR PCI Express Port #1 (rev. 0x03)
pci2 at ppb1 bus 32
pci2: no spaces enabled!
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: wrong number of companions (4 != 3)
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled
iwi0 at pci3 dev 4 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:15:00:1b:30:9c
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0 at pci3 dev 6 function 0: Texas Instruments product 0x8031 (rev. 0x00)
Texas Instruments product 0x8033 (miscellaneous mass storage) at pci3 dev 6 function 3 not configured
Texas Instruments product 0x8034 (system subclass 0x05) at pci3 dev 6 function 4 not configured
Texas Instruments product 0x8035 (miscellaneous communications) at pci3 dev 6 function 5 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801FB/FR AC'97 Modem Controller (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <UJDA765aDVD/CDRW, , 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0: <HTE721010G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: SanDisk ImageMate CF, rev 2.00/1.19, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 0119> disk removable
sd0: fabricating a geometry
sd0: 15616 KB, 15 cyl, 64 head, 32 sec, 512 bytes/sect x 31232 sectors
sd0: fabricating a geometry
sd0: fabricating a geometry
boot device: <unknown>
root device: wd0
dump device (default wd0b): 
file system (default generic): 
root on wd0a dumps on wd0b
root file system type: ffs
init path (default /sbin/init): 
init: trying /sbin/init
umass0: at uhub3 port 3 (addr 2) disconnected
sd0 detached
scsibus0 detached
umass0 detached
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: SanDisk Corp. Cruzer Micro, rev 2.00/20.33, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Micro, 2033> disk removable
sd0: fabricating a geometry
sd0: 250 MB, 250 cyl, 64 head, 32 sec, 512 bytes/sect x 512000 sectors
sd0: fabricating a geometry

--dDRMvlgZJXvWKvBx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-3.1_RC1"

NetBSD 3.1_RC1 (GENERIC) #0: Mon Aug 21 02:06:43 UTC 2006
	builds@b4.netbsd.org:/home/builds/ab/netbsd-3-1-RC1/i386/200608202102Z-obj/home/builds/ab/netbsd-3-1-RC1/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 484 MB
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1995.37 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep (1356 mV) 2000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1600 1333 1067 800
cpu0: 64 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82915PM/GM/GMS,82910GML Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: Intel 82915GM/GMS Integrated Graphics Device (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82915GM/GMS IGD Companion (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci1 at ppb0 bus 16
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci1 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
bge0: interrupting at irq 10
bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000
bge0: ASIC BCM5751 A1 (0x4101), Ethernet address 00:14:38:1c:18:39
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel 82801FB/FR PCI Express Port #1 (rev. 0x03)
pci2 at ppb1 bus 32
pci2: no spaces enabled!
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: wrong number of companions (4 != 3)
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled
iwi0 at pci3 dev 4 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:15:00:1b:30:9c
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0 at pci3 dev 6 function 0: Texas Instruments product 0x8031 (rev. 0x00)
Texas Instruments product 0x8033 (miscellaneous mass storage) at pci3 dev 6 function 3 not configured
Texas Instruments product 0x8034 (system subclass 0x05) at pci3 dev 6 function 4 not configured
Texas Instruments product 0x8035 (miscellaneous communications) at pci3 dev 6 function 5 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801FB/FR AC'97 Modem Controller (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <UJDA765aDVD/CDRW, , 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0: <HTE721010G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: SanDisk ImageMate CF, rev 2.00/1.19, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 0119> disk removable
sd0: fabricating a geometry
sd0: 15616 KB, 15 cyl, 64 head, 32 sec, 512 bytes/sect x 31232 sectors
sd0: fabricating a geometry
sd0: fabricating a geometry
boot device: <unknown>
root device: wd0
dump device (default wd0b): 
file system (default generic): 
root on wd0a dumps on wd0b
root file system type: ffs
init path (default /sbin/init): 
init: trying /sbin/init
umass0: at uhub3 port 3 (addr 2) disconnected
sd0 detached
scsibus0 detached
umass0 detached
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: SanDisk Corp. Cruzer Micro, rev 2.00/20.33, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Micro, 2033> disk removable
sd0: fabricating a geometry
sd0: 250 MB, 250 cyl, 64 head, 32 sec, 512 bytes/sect x 512000 sectors
sd0(umass0:0:0:0): no door lock
sd0: fabricating a geometry

--dDRMvlgZJXvWKvBx--