Subject: Re: Running SMP port-i386 on dual core AMD64 chips
To: None <hubertf@gmx.de>
From: Jeff Rizzo <riz@NetBSD.org>
List: port-i386
Date: 10/14/2005 12:32:21
This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enigBE3346A4BA6D03600A71DDC3
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Hubert Feyrer wrote:

>In article <Pine.NEB.4.63.0510101611370.433@forsaken.i> you wrote:
>  
>
>>        Wonderful - thanks. AMD X2 4800+ ordered :)
>>    
>>
>
>Post dmesg!
>
>
> - Hubert
>  
>

Here's the (i386) dmesg of my asus a8v with amd x2 3800. Note this is
with MPBIOS, not MPACPI:



Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.9 (FUBAR) #1: Fri Oct 14 12:20:30 PDT 2005
       
riz@fubar.york.redcrowgroup.com:/lfs/buildobj/usr/src/sys/arch/i386/compile/FUBAR
total memory = 1023 MB
avail memory = 997 MB
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (ASUSTeK              )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Unknown K7 (Athlon) (686-class), 2004.69 MHz, id 0x20fb1
cpu0: features 178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 178bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
cpu0: features 178bfbff<FXSR,SSE,SSE2,B28>
cpu0: features2 1<SSE3>
cpu0: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Unknown K7 (Athlon) (686-class), 2004.55 MHz, id 0x20fb1
cpu1: features 178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 178bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
cpu1: features 178bfbff<FXSR,SSE,SSE2,B28>
cpu1: features2 1<SSE3>
cpu1: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
mpbios: bus 0 is type PCI  
mpbios: bus 1 is type PCI  
mpbios: bus 2 is type ISA  
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0282 (rev. 0x00)
agp0 at pchb0: aperture at 0xe0000000, size 0xe500000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia GeForce4 Ti 4200 (AGP8X) (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 10)
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:13:d4:65:d9:b6
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
unknown vendor 0xe159 product 0x0001 (miscellaneous communications) at
pci0 dev 12 function 0 not configured
pdcide0 at pci0 dev 13 function 0
pdcide0: Promise Ultra100TX2/ATA Bus Master IDE Accelerator (rev. 0x02)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using ioapic0 pin 18 (irq 5) for native-PCI interrupt
atabus0 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus1 at pdcide0 channel 1
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus2 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus3 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus4 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus5 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB
Controller (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB
Controller (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB
Controller (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB
Controller (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB
Controller (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 5)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio
(rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 5)
auvia0: ac97: Avance Logic ALC850 codec; no 3D stereo
auvia0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auvia0: full duplex, independent
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
uhub5 at uhub1 port 2
uhub5: NEC hub, class 9/0, rev 1.00/1.00, addr 2
uhub5: 4 ports with 4 removable, bus powered
wd0 at atabus0 drive 0: <Maxtor 52049H3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19541 MB, 39704 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus1 drive 0: <Maxtor 5T020H2>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 19541 MB, 39704 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(pdcide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 1: <Compaq DVD-ROM DVD-113              011, ,
E1.14> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd2 at atabus4 drive 0: <IC35L120AVVA07-0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 115 GB, 239340 cyl, 16 head, 63 sec, 512 bytes/sect x 241254720 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(viaide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: Alps Electric M2452, rev 1.00/1.01, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wd2: transfer error, downgrading to Ultra-DMA mode 4
wd2(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd0(viaide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd2a: error writing fsbn 128 of 128-131 (wd2 bn 191; cn 0 tn 3 sn 2),
retrying
wd2: (aborted command, interface CRC error)
wd2: soft error (corrected)


--------------enigBE3346A4BA6D03600A71DDC3
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (Darwin)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iQCVAwUBQ1AHyrOuUtxCgar5AQM45wP/S7fx1XSoNf83QbXUgjTlhjX8ojoCQm6q
3/rjqHR/WdtYaOv4LmrtlaLs7RlcNPIpsmh2cmtLlEFHfp9tJJ2GEfj/WlqnukjF
RIc/xINHPa9C60omwvs7OVqK/CUhBSPB3rK3Qj8XzjcHjNWtB0qO6ZrqUXFIGxTW
ElF+QwO6uSg=
=v7KA
-----END PGP SIGNATURE-----

--------------enigBE3346A4BA6D03600A71DDC3--