On Jul 3, 2005, at 8:25 AM, John Franklin wrote:

> On Jul 3, 2005, at 8:49 AM, Mirko Thiesen wrote:
>
>
>> 1. The onboard audio chip isn't recognized:
>>
>> Cirrus Logic CS4610 SoundFusion Audio Accelerator (audio  
>> multimedia, revision 0x01) at pci0 dev 6 function 0 not configured  
>> pcib0 at pci0 dev 7 function 0
>>
>>
>
> I had one of these when I was working at IBM four years ago.  IIRC,  
> wss* at isapnp?  or wss* at pnpbios? worked.

Yeah.  I don't have my 600E anymore, but here's a dmesg from the  
1.6.1 days:

NetBSD 1.6.1 (BOB) #0: Sat Apr 26 22:41:24 PDT 2003
     soren@bob:/junk/src-1.6.1/sys/arch/i386/compile/BOB
cpu0: Intel Celeron (Mendocino) (686-class), 397.07 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 287 MB
avail memory = 262 MB
using 3704 buffers containing 14816 KB of memory
BIOS32 rev. 0 found at 0xfd820
PCI BIOS rev. 2.1 found at 0xfd880
pcibios: config mechanism [1][x], special cycles [1][x], last bus 7
PCI IRQ Routing Table rev. 1.0 found at 0xf9e20, size 112 bytes (5  
entries)
PCI Interrupt Router at 000:07:0
PCI Exclusive IRQs: 11
------------------------------------------
   device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x104c 0xac1d   A  0x00  11  0    already assigned
000:02:1 0x104c 0xac1d   B  0x01  11  0    already assigned
000:06:0 0x1013 0x6001   A  0x00  11  0    already assigned
000:07:2 0x8086 0x7112   D  0x03  11  0    already assigned
001:00:0 0x10c8 0x0005   A  0x00  11  0    already assigned
------------------------------------------
PCI fixup examining 8086:7190
PCI fixup examining 8086:7191
PCI fixup examining 10c8:05
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 104c:ac1d
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 104c:ac1d
PCI bridge 2: primary 0, secondary 3, subordinate 3
PCI fixup examining 1013:6001
PCI fixup examining 8086:7110
PCI fixup examining 8086:7111
PCI fixup examining 8086:7112
PCI fixup examining 8086:7113
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
   device vendor product
   register space address    size
--------------------------------------------
000:00:0 0x8086 0x7190
     10h mem  0x40000000 0x04000000
         [OK]
000:01:0 0x8086 0x7191
         [OK]
000:02:0 0x104c 0xac1d
     10h mem  0x50102000 0x00001000
         [OK]
000:02:1 0x104c 0xac1d
     10h mem  0x50101000 0x00001000
         [OK]
000:06:0 0x1013 0x6001
     10h mem  0x50100000 0x00001000
     14h mem  0x50000000 0x00100000
         [OK]
000:07:0 0x8086 0x7110
         [OK]
000:07:1 0x8086 0x7111
     20h port 0x0000fcf0 0x00000010
         [OK]
000:07:2 0x8086 0x7112
     20h port 0x00008400 0x00000020
         [OK]
000:07:3 0x8086 0x7113
         [OK]
001:00:0 0x10c8 0x0005
     10h mem  0xe0000000 0x01000000
     14h mem  0x70000000 0x00400000
     18h mem  0x70400000 0x00100000
         [OK]
--------------------------[  0 devices bogus]
Physical memory end: 0x11fce000
PCI memory mapped I/O space start: 0x12000000
mainbus0 (root)
pnpbios0 at mainbus0: nodes 23, max len 980
pnpbios0: not docked
wss0 at pnpbios0 index 14 (CSC0100)
wss0: io 530-537 388-38b 220-233, irq 5, dma 1 0
wss0: CS4236B compatible
audio0 at wss0: full duplex, mmap
opl0 at wss0: model OPL3
midi0 at opl0: WSS Yamaha OPL3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x03)
agp0 at pchb0: aperture at 0x40000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x10c8 product 0x0005 (rev. 0x12)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 2 function 0: vendor 0x104c product 0xac1d (rev. 0x00)
cbb1 at pci0 dev 2 function 1: vendor 0x104c product 0xac1d (rev. 0x00)
vendor 0x1013 product 0x6001 (audio multimedia, revision 0x01) at  
pci0 dev 6 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller  
(PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC25N020ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080  
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)  
(using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRN-8241B, 1999/09/04, 1.22> type 5 cdrom  
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data  
transfers)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at  
pci0 dev 7 function 3 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x3bc-0x3bf irq : polled
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask efcd netmask efcd ttymask ffcf
IPsec: Initialized Security Association Processing.
wi0 at pcmcia1 function 0: Lucent Technologies, WaveLAN/IEEE, Version  
01.01
wi0: 802.11 address 00:02:2d:49:c4:bb
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.28.1)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x50, vt100 emulation)