--0IvGJv3f9h+YhkrH
Content-Type: multipart/mixed; boundary="UFHRwCdBEJvubb2X"
Content-Disposition: inline


--UFHRwCdBEJvubb2X
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Sat, Nov 06, 2004 at 06:39:29AM +0100, Matthias Buelow wrote:
> I've bought a new Dell PC and found out that NetBSD won't even boot on=20
> it.  In particular, it seems that NetBSD has problems with one or more=20
> of the following topics:
>=20
>  - PCI-Express
>  - Serial ATA
>  - Intel On-Board NICs such as the EtherPro/100 on the 915G chipset

All of these work fine for me (with NetBSD-current, at least).  My new
Dell PC, with 925X chipset, boots just fine, and everything works.
Full dmesg attached below.  Not sure what your problem might be.

However, there are a couple of things not recognised, any comments on
these?

vga0 at pci1 dev 0 function 0: ATI Technologies product 0x5d57 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ATI Technologies product 0x5d77 (miscellaneous display) at pci1 dev 0 funct=
ion 1 not configured

seems like the graphics card has some second function? It's a "Radeon
X800-XT" or something very similar.

Intel 82801FB/FR AC'97 Audio Controller (audio multimedia, revision 0x03) a=
t pci0 dev 30 function 2 not configured

I'm going to guess this one is a matter of adding pci id's to an
existing driver; I'll get around to trying that sooner or later, but
the emuxki audigy2 works.

--
Dan.

--UFHRwCdBEJvubb2X
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.dell"

NetBSD 2.99.10 (GENERIC.MPACPI) #0: Wed Nov 10 19:09:25 EST 2004
	dan@resurgam:/home/NetBSD/obj/p4/home/NetBSD/HEAD/src/sys/arch/i386/compile/GENERIC.MPACPI
total memory = 2046 MB
avail memory = 1994 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 3391.69 MHz, id 0xf34
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 441d<SSE3,MONITOR,DS-CPL,CID>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.40GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: running without thermal monitor!
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel (686-class), 3391.51 MHz, id 0xf34
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 441d<SSE3,MONITOR,DS-CPL,CID>
cpu1: "Intel(R) Pentium(R) 4 CPU 3.40GHz"
cpu1: I-cache 12K uOp cache 8-way
cpu1: L2 cache 1 MB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: running without thermal monitor!
ioapic0 at mainbus0 apid 8 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 8
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <DELL  , 8400   ,00000007>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77f irq 7
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0103 at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82925X Host (rev. 0x04)
ppb0 at pci0 dev 1 function 0: Intel 82925X PCI Express Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x5d57 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ATI Technologies product 0x5d77 (miscellaneous display) at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16 (irq 11)
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:11:11:45:eb:f6
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 1: Intel 82801FB/FR PCI Express Port #1 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller #0 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 21 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller #1 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 22 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller #2 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 18 (irq 3)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller #3 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 23 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 21 (irq 9)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
Conexant Systems product 0x2f20 (miscellaneous communications) at pci4 dev 1 function 0 not configured
emuxki0 at pci4 dev 2 function 0: Creative Labs SB Audigy EMU 10000 (audio multimedia, revision 0x04)
emuxki0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
audio0 at emuxki0: full duplex, mmap, independent
emuxki0: interrupting at ioapic0 pin 18 (irq 3)
Creative Labs product 0x4001 (Firewire serial bus, interface 0x10, revision 0x04) at pci4 dev 2 function 2 not configured
Intel 82801FB/FR AC'97 Audio Controller (audio multimedia, revision 0x03) at pci0 dev 30 function 2 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801FB LPC Interface Bridge (rev. 0x03)
pciide0 at pci0 dev 31 function 1
pciide0: Intel 82801FB/FR IDE Controller (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FR Serial ATA/Raid Controller (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to native-PCI mode
piixide0: using ioapic0 pin 20 (irq 5) for native-PCI interrupt
atabus1 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus2 at piixide0 channel 1
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD+/-RW ND-3450A, , 102B> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
uhub5 at uhub4 port 4
uhub5: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
wd0 at atabus1 drive 0: <ST3160023AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
boot device: bge0
root on bge0
nfs_boot: trying DHCP/BOOTP
uhidev1 at uhub2 port 1 configuration 1 interface 0
uhidev1: Dell Dell USB Mouse, rev 2.00/1.10, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
nfs_boot: DHCP next-server: 192.168.210.1
nfs_boot: my_addr=192.168.210.221
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.210.1
root on 192.168.210.1:/home/netboot/i386
root file system type: nfs
cpu1: CPU 1 running

--UFHRwCdBEJvubb2X--

--0IvGJv3f9h+YhkrH
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (NetBSD)

iD8DBQFBkfHjEAVxvV4N66cRAjKnAJ4wGhATGFgn+DnP5Q2Y/wEmUJw1LACgtMUv
+HEX/1rMKEvWiLol9M7x+1o=
=9OCL
-----END PGP SIGNATURE-----

--0IvGJv3f9h+YhkrH--