On Sat, 20 Sep 2003, Frederick Bruckman wrote:

> On Sat, 20 Sep 2003, Frank van der Linden wrote:
>
> > On Sat, Sep 20, 2003 at 08:09:24AM -0500, Frederick Bruckman wrote:
> > > I have a Compaq W8000, 2.2GHz, which does have an option in the CMOS
> > > utility to enable hyperthreading, but no matter -- NetBSD 1.6ZC as of
> > > yesterday still sees only one processor (feature list shows HTT, BIOS
> > > has been upgraded to the latest, 1.27).
> >
> > Have you tried a kernel with acpi and MPACPI?
>
> Only GENERIC.MP so far. I was going to try that next anyway...
>
> Who hoo! It works:
>

I have a similar situation: MSI Neo2 FIS2R Motherboard with a 2.4Ghz
P4. The BIOS does not even offer the "Hyperthreading option" and
NetBSD's current GENERIC.MP kernel does not find the "second" CPU
either.  Enabling MPACPI finds the second CPU.

With acpi enabled, my quad-ethernet card becomes unusable. After boot,
I get many

tlp0: filter setup and transmit timeout

messages.  The interrupt rate on ioapic0 pin 19 is about 30,000/sec.
Looks like something is wrong with the interrupt routing, the lines

tlp0: interrupting at ioapic0 pin 5 (irq 5)

look suspect. Adding option ACPI_PCI_FIXUP gets me

pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x8086 product 0x24d0
Warning: unable to fix up PCI interrupt routing

For now I am fine with another Ethernet card.


NetBSD 1.6ZC (WOFFI) #1: Sat Sep 20 12:02:09 EDT 2003
 root@woffi.planix.com:/m5/netbsd-current/obj/sys/arch/i386/compile.i386/WOFFI.MP
total memory = 511 MB
avail memory = 468 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfdb60
PCI BIOS rev. 2.1 found at 0xfdb81
PCI IRQ Routing Table rev. 1.0 found at 0xf76a0, size 256 bytes (14 entries)
PCI Interrupt Router at 000:31:0 (Intel 82801EB LPC Interface Bridge)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x8086 product 0x24d0
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 2434.18 MHz, id 0xf25
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 202 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium 4 (686-class), 2434.10 MHz, id 0xf25
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu1: L2 cache 512 KB 64b/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20030228
acpi0: X/RSDT: OemId <AMIINT,INTEL865,00000010>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
INT0800 at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
Sep 20 12:17:50 wotan last message repeated 3 times
PNP0C0F [PCI interrupt link device] at acpi0 not configured
Sep 20 12:17:50 wotan last message repeated 6 times
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
configuring bus 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82865 Host (rev. 0x02)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82865 AGP (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX (rev. 0xb2)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 3 function 0: Intel 82801EB Hub-to-PCI Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Intel i82547EI Gigabit Ethernet (ethernet network) at pci2 dev 1 function 0 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller #0 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller #1 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller #2 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller #3 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 12)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0xc2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
Promise Technology Serial ATA/150 TX4 Controller (miscellaneous mass storage, revision 0x02) at pci3 dev 1 function 0 not configured
Promise Technology Serial ATA/150 TX4 Controller (miscellaneous mass storage, revision 0x02) at pci3 dev 2 function 0 not configured
ppb3 at pci3 dev 3 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
tlp0 at pci4 dev 4 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at ioapic0 pin 5 (irq 5)
tlp0: Ethernet address 00:60:f5:04:0c:f4
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci4 dev 5 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at ioapic0 pin 11 (irq 11)
tlp1: Ethernet address 00:60:f5:04:0c:f5
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp2 at pci4 dev 6 function 0: DECchip 21143 Ethernet, pass 4.1
tlp2: interrupting at ioapic0 pin 6 (irq 6)
tlp2: Ethernet address 00:60:f5:04:0c:f6
lxtphy2 at tlp2 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp3 at pci4 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp3: interrupting at ioapic0 pin 10 (irq 10)
tlp3: Ethernet address 00:60:f5:04:0c:f7
lxtphy3 at tlp3 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci3 dev 9 function 0: Promise Serial ATA/150 TX2plus Bus Master IDE Accelerator (MB) (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: primary channel ignored (disabled)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (disabled)
fwohci0 at pci3 dev 10 function 0: VIA Technologies VT3606 OHCI IEEE 1394 Controller (rev. 0x46)
fwohci0: interrupting at ioapic0 pin 21 (irq 10)
fwohci0: OHCI 1.0, 00:00:10:dc:00:36:fd:ef, 400Mb/s, 2048 max_rec, 8 ir_ctx, 8 it_ctx
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
pciide1 at pci0 dev 31 function 1: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel wired to compatibility mode
atapibus0 at pciide1 channel 0: 2 targets
cd0 at atapibus0 drive 1: <SONY CD-ROM CDU4821, MT1198-B Firmware, S0.Q> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at pciide1 channel 0 drive 0: <WDC WD400JB-00ENA0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide1: secondary channel wired to compatibility mode
wd1 at pciide1 channel 1 drive 0: <WDC WD400JB-00ENA0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lm0 at isa0 port 0x290-0x297: W83627HF
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
fw0 at fwohci0: 00:00:10:dc:00:36:fd:ef:0a:02:ff:ff:f0:01:00:00
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
tlp0: filter setup and transmit timeout