I had recently installed NetBSD 1.6 on one IBM PS/2 9595-0PT. The
trouble is with the ethernet adapter 'we2'. How should the resources be
set so as to fix the 'shared memory' problem?

    I had set a BusLogic MCA SCSI adaptor to resources normally used by
Adaptec (i/o=0x330-0x333 irq=15 dma=7). It works like the AHA-1640. No
trouble reported so far.

NetBSD 1.6 (GENERIC) #0: Sun Sep  8 19:43:40 UTC 2002

autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/src/sys/arch/i386/compile/GENERIC

cpu0: Intel Pentium (P5) (586-class), 60.01 MHz
cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
total memory = 65148 KB
avail memory = 53956 KB
using 839 buffers containing 3356 KB of memory
mainbus0 (root)
mca0 at mainbus0
mca0 slot 1: IBM Fast SCSI-2 Adapter (0x8efc) not configured
mca0 slot 3: BusTek BT-640A SCSI Host Adapter (0x0708) not configured
mca0 slot 5: IBM XGA/XGA-2 Display Adapter (0x8fda) not configured
we2 at mca0 slot 7 irq 3: EtherCard PLUS Elite 10T/A (8013WP/A)
we2: can't map shared memory
isa0 at mainbus0
aha0 at isa0 port 0x330-0x333 irq 15 drq
aha0: model AHA-1640, firmware 3.3
aha0: sync, no parity
aha0 targ 0: sync, offset 8, period 200nsec
aha0 targ 1: sync, offset 8, period 200nsec
aha0 targ 3: sync, offset 15, period 250nsec
scsibus0 at aha0: 8 targets, 8 luns per target
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using
wskbd0
wsmux1: connecting to wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
WARNING: Pentium FDIV bug detected!
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ef65 netmask ef65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <CORE, 1.0GB, 9028> SCSI2 0/direct fixed

sd0: 955 MB, 1921 cyl, 16 head, 63 sec, 512 bytes/sect x 1956864 sectors

sd1 at scsibus0 target 1 lun 0: <CORE, 1.0GB, 9028> SCSI2 0/direct fixed

sd1: 955 MB, 1921 cyl, 16 head, 63 sec, 512 bytes/sect x 1956864 sectors

cd0 at scsibus0 target 3 lun 0: <TOSHIBA, CD-ROM XM-4101TA, 2893> SCSI2
5/cdrom removable
Kernelized RAIDframe activated
sd0: no disk label
sd0: no disk label
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
sd0: no disk label

TiA

Paul