>Add a driver for the AMD Elan SC520 System Controller.  The "elansc"
>driver attaches where "pchb" would normally attach (it matches at a
>higher match priority).  The "elansc" driver currently provides support
>for the watchdog timer built-in the SC520.

	so is it unsafe to enable it for GENERIC?

	do people remember what is the CPU for Wildlab LAMB?    dmesg is
	silent about it (or i'm using too old kernel - i know i should
	upgrade it)

itojun


% /sbin/dmesg
NetBSD 1.6B (LAMB) #2: Fri Jun 28 02:08:18 JST 2002
    itojun@starfruit.itojun.org:/usr/home/itojun/NetBSD/src/sys/arch/i386/compile/LAMB
cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 (486-class)
cpu0: features 1<FPU>
total memory = 32380 KB
avail memory = 27672 KB
using 430 buffers containing 1720 KB of memory
mainbus0 (root)
isa0 at mainbus0
ne0 at isa0 port 0x200-0x21f irq 3
ne0: NE2000 (RTL8019) Ethernet
ne0: Ethernet address 00:30:f5:00:65:80
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne1 at isa0 port 0x300-0x31f irq 10
ne1: NE2000 (RTL8019) Ethernet
ne1: Ethernet address 00:30:f5:00:65:81
ne1: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-128>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 122 MB, 980 cyl, 8 head, 32 sec, 512 bytes/sect x 250880 sectors
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask fbe7 netmask ffef ttymask ffef
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs