--XsQoSWH+UP9D9v3l
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On January 14, 2002, Laine Stump sent me the following:
> Chip Marshall <chip@setzer.chocobo.cx> writes:
> > I've got two of them running NetBSD at the moment.
> 
> Enquiring minds want to know: are all the onboard devices supported?
> (sound, firewire, ethernet, video in X) (I'm pretty sure I know the
> answer for the ethernet is yes, but don't know about the others).

Sound is a normal VIA AC97 chip, which is supported.
Firewire I'm not sure off. I'm still running GENERIC on the box I have
here, and I don't see any Firewire stuff in dmesg.
Ethernet is a Realtek chip, supported.
Video is a Savage 4, which should work in X, though I havn't tried.

I've attached a dmesg.

-- 
Chip Marshall <chip@chocobo.cx>               http://www.chocobo.cx/chip/
GCM/CS d+(-) s+:++ a20>? C++ UB++++$ P+++$ L- E--- W++ N@ o K- w O M+ V--
PS+ PE Y+ PGP+ t+@ 5 X R@ tv+() b++>+++ DI++++ D(-) G++ e>++ h->++ r++ y-

--XsQoSWH+UP9D9v3l
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.txt"

NetBSD 1.5.2 (GENERIC) #3: Sat Aug 18 23:37:05 CEST 2001
    he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) (686-class), 931.02 MHz
total memory = 247 MB
avail memory = 224 MB
using 3194 buffers containing 12776 KB of memory
BIOS32 rev. 0 found at 0xfb380
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0605 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8605 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 product 0x8a25 (rev. 0x02)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST34321A>
wd0: drive supports 32-sector pio transfers, lba addressing
wd0: 4103 MB, 8894 cyl, 15 head, 63 sec, 512 bytes/sect x 8404830 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT82C686A SMBus Controller (miscellaneous bridge, revision 0x40) at pci0 dev 7 function 4 not configured
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 5
auvia0: ICE17 codec; headphone, 18 bit DAC, 18 bit ADC, Unknown 3D
audio0 at auvia0: full duplex, mmap, independent
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 12
bktr0: FlyVideo, <no> tuner.
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x02) at pci0 dev 10 function 1 not configured
rtk0 at pci0 dev 12 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:30:1b:07:07:41
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
AT&T Microelectronics product 0x5811 (Firewire serial bus, interface 0x10, revision 0x04) at pci0 dev 15 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
biomask ff4d netmask ff4d ttymask ffcf
umodem0 at uhub0 port 2 configuration 2 interface 0
umodem0: Zoom Telephonics, Inc. Zoom V90 USB Faxmodem, rev 1.00/1.00, addr 2, iclass 2/2
umodem0: data interface 1, has CM over data, has break
ucom0 at umodem0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
bktr0: read: tsleep error -1
pckbc: cmd failed

--XsQoSWH+UP9D9v3l--