Subject: Laptop help. :)
To: None <port-i386@netbsd.org>
From: Peter Seebach <seebs@plethora.net>
List: port-i386
Date: 12/11/2001 12:01:21
Well, I'm close to functional, anyway. My mom's new laptop is a Compaq
Armada M110. Audio and ethernet are working fine; haven't tried X yet.
The problem I was hoping to fix is that the PCMCIA slot isn't working,
because it hasn't got a configured interrupt.
Here's a dmesg. I've tried various combinations of the PCIBIOS options,
with no luck, but I don't really know what I'm trying to do yet. Any
advice? I think I've tried the combination in the ARMADA config file, but
I don't know which kind of armada that's for.
NetBSD 1.5Z (ANNE) #0: Tue Dec 11 18:27:06 MST 2001
root@:/usr/src/sys/arch/i386/compile/ANNE
cpu0: Intel Pentium III (Coppermine) Celeron (686-class), 697.48 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR,SSE>
total memory = 187 MB
avail memory = 170 MB
using 2426 buffers containing 9704 KB of memory
BIOS32 rev. 0 found at 0xfd720
PCI BIOS rev. 2.1 found at 0xfd83e
PCI IRQ Routing Table rev. 1.0 found at 0xfdf70, size 112 bytes (5 entries)
PCI Interrupt Router at 000:07:0 (vendor 0x1106 product 0x0596)
pciintr_link_alloc: bus 0 device 10: link 0x05 invalid
pciintr_link_alloc: bus 0 device 7: link 0x05 invalid
pci_addr_fixup: 000:10:0 0x104c 0xac50 new address 0x0bc00000
mainbus0 (root)
pnpbios0 at mainbus0: nodes 19, max len 164
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0601 (rev. 0x05)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8601 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1023 product 0x8520 (rev. 0x6a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0686 (rev. 0x22)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRN-8243B, 2000/01/28, 1.04> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x10)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x1106 product 0x3057 (miscellaneous bridge, revision 0x30) at pci0 dev 7 function 4 not configured
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev H)
auvia0: interrupting at irq 9
auvia0: ADS72 codec; headphone, Analog Devices Phat Stereo
audio0 at auvia0: full duplex, mmap, independent
fxp0 at pci0 dev 9 function 0: i82559S Ethernet, rev 9
fxp0: interrupting at irq 11
fxp0: detected 256 word EEPROM
fxp0: Ethernet address 00:d0:59:67:b6:8d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x11c1 product 0x045c (serial communications) at pci0 dev 9 function 1 not configured
cbb0 at pci0 dev 10 function 0: vendor 0x104c product 0xac50 (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ed65 netmask ed65 ttymask fde7
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
boot device: wd0
root on wd0a dumps on wd0b
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
syncing disks... done
unmounting /proc (procfs)...
unmounting /kern (kernfs)...
unmounting /home (/dev/wd0h)...
unmounting /dos (/dev/wd0g)...
unmounting /usr/src (/dev/wd0f)...
unmounting /usr (/dev/wd0e)...
unmounting / (/dev/wd0a)...
rebooting...
NetBSD 1.5Z (ANNE) #1: Tue Dec 11 23:51:57 MST 2001
root@:/usr/src/sys/arch/i386/compile/ANNE
cpu0: Intel Pentium III (Coppermine) Celeron (686-class), 697.48 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR,SSE>
total memory = 187 MB
avail memory = 170 MB
using 2426 buffers containing 9704 KB of memory
BIOS32 rev. 0 found at 0xfd720
PCI BIOS rev. 2.1 found at 0xfd83e
PCI IRQ Routing Table rev. 1.0 found at 0xfdf70, size 112 bytes (5 entries)
PCI Interrupt Router at 000:07:0 (vendor 0x1106 product 0x0596)
mainbus0 (root)
pnpbios0 at mainbus0: nodes 19, max len 164
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0601 (rev. 0x05)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8601 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1023 product 0x8520 (rev. 0x6a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0686 (rev. 0x22)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRN-8243B, 2000/01/28, 1.04> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x10)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x1106 product 0x3057 (miscellaneous bridge, revision 0x30) at pci0 dev 7 function 4 not configured
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev H)
auvia0: interrupting at irq 9
auvia0: ADS72 codec; headphone, Analog Devices Phat Stereo
audio0 at auvia0: full duplex, mmap, independent
fxp0 at pci0 dev 9 function 0: i82559S Ethernet, rev 9
fxp0: interrupting at irq 11
fxp0: detected 256 word EEPROM
fxp0: Ethernet address 00:d0:59:67:b6:8d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x11c1 product 0x045c (serial communications) at pci0 dev 9 function 1 not configured
cbb0 at pci0 dev 10 function 0: vendor 0x104c product 0xac50 (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ed65 netmask ed65 ttymask fde7
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
boot device: wd0
root on wd0a dumps on wd0b
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
syncing disks... 2 done
unmounting /proc (procfs)...
unmounting /kern (kernfs)...
unmounting /home (/dev/wd0h)...
unmounting /dos (/dev/wd0g)...
unmounting /usr/src (/dev/wd0f)...
unmounting /usr (/dev/wd0e)...
unmounting / (/dev/wd0a)...
rebooting...
NetBSD 1.5Z (ANNE) #2: Tue Dec 11 23:55:07 MST 2001
root@:/usr/src/sys/arch/i386/compile/ANNE
cpu0: Intel Pentium III (Coppermine) Celeron (686-class), 697.50 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR,SSE>
total memory = 187 MB
avail memory = 170 MB
using 2426 buffers containing 9704 KB of memory
BIOS32 rev. 0 found at 0xfd720
PCI BIOS rev. 2.1 found at 0xfd83e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfdf70, size 112 bytes (5 entries)
PCI Interrupt Router at 000:07:0 (vendor 0x1106 product 0x0596)
pciintr_link_alloc: bus 0 device 10: link 0x05 invalid
pciintr_link_alloc: bus 0 device 7: link 0x05 invalid
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:07:5 0x1106 0x3058 C 0x02 11 0 WARNING: preserving irq 9
000:09:0 0x8086 0x1229 A 0x01 11 0 already assigned
000:09:1 0x11c1 0x045c A 0x01 11 0 already assigned
------------------------------------------
PCI fixup examining 1106:601
PCI fixup examining 1106:8601
PCI fixup examining 1023:8520
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 1106:686
PCI fixup examining 1106:571
PCI fixup examining 1106:3038
PCI fixup examining 1106:3057
PCI fixup examining 1106:3058
PCI fixup examining 8086:1229
PCI fixup examining 11c1:45c
PCI fixup examining 104c:ac50
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1106 0x0601
10h mem 0xf8000000 0x04000000
[OK]
000:01:0 0x1106 0x8601
[OK]
000:07:0 0x1106 0x0686
[OK]
000:07:1 0x1106 0x0571
20h port 0x00001460 0x00000010
[OK]
000:07:2 0x1106 0x3038
20h port 0x00001440 0x00000020
[OK]
000:07:4 0x1106 0x3057
[OK]
000:07:5 0x1106 0x3058
10h port 0x00001000 0x00000100
14h port 0x00001474 0x00000004
18h port 0x00001470 0x00000004
[OK]
000:09:0 0x8086 0x1229
10h mem 0xf4020000 0x00001000
14h port 0x00001400 0x00000040
18h mem 0xf4000000 0x00020000
[OK]
000:09:1 0x11c1 0x045c
10h port 0x00001478 0x00000008
14h mem 0xf4021000 0x00001000
[OK]
000:10:0 0x104c 0xac50
10h mem 0x00000000 0x00001000
[NG]
001:00:0 0x1023 0x8520
10h mem 0xf5000000 0x00800000
14h mem 0xf4100000 0x00020000
18h mem 0xf4800000 0x00800000
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x0bbe8000
PCI memory mapped I/O space start: 0x0bc00000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1106 0x0601
10h mem 0xf8000000 0x04000000
[OK]
000:01:0 0x1106 0x8601
[OK]
000:07:0 0x1106 0x0686
[OK]
000:07:1 0x1106 0x0571
20h port 0x00001460 0x00000010
[OK]
000:07:2 0x1106 0x3038
20h port 0x00001440 0x00000020
[OK]
000:07:4 0x1106 0x3057
[OK]
000:07:5 0x1106 0x3058
10h port 0x00001000 0x00000100
14h port 0x00001474 0x00000004
18h port 0x00001470 0x00000004
[OK]
000:09:0 0x8086 0x1229
10h mem 0xf4020000 0x00001000
14h port 0x00001400 0x00000040
18h mem 0xf4000000 0x00020000
[OK]
000:09:1 0x11c1 0x045c
10h port 0x00001478 0x00000008
14h mem 0xf4021000 0x00001000
[OK]
000:10:0 0x104c 0xac50
10h mem 0x0bc00000 0x00001000
[OK]
001:00:0 0x1023 0x8520
10h mem 0xf5000000 0x00800000
14h mem 0xf4100000 0x00020000
18h mem 0xf4800000 0x00800000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
pnpbios0 at mainbus0: nodes 19, max len 164
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0601 (rev. 0x05)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8601 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1023 product 0x8520 (rev. 0x6a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0686 (rev. 0x22)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRN-8243B, 2000/01/28, 1.04> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x10)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x1106 product 0x3057 (miscellaneous bridge, revision 0x30) at pci0 dev 7 function 4 not configured
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev H)
auvia0: interrupting at irq 9
auvia0: ADS72 codec; headphone, Analog Devices Phat Stereo
audio0 at auvia0: full duplex, mmap, independent
fxp0 at pci0 dev 9 function 0: i82559S Ethernet, rev 9
fxp0: interrupting at irq 11
fxp0: detected 256 word EEPROM
fxp0: Ethernet address 00:d0:59:67:b6:8d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x11c1 product 0x045c (serial communications) at pci0 dev 9 function 1 not configured
cbb0 at pci0 dev 10 function 0: vendor 0x104c product 0xac50 (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ed65 netmask ed65 ttymask fde7
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
boot device: wd0
root on wd0a dumps on wd0b
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)