So the Libretto L2 came out today (the new model with Ethernet instead of
firewire), and I couldn't resist buying one. (Kawaii yo!) NetBSD installed
very smoothly. I've not built a new kernel or tried X on it yet, but I
thought I'd post the dmesg and solicit comments.

I don't know what the PCI "RAM memory" devices are. The sound, power
management and cardbus don't get configured; do we have even experimental
drivers for any of this stuff? (I particularly want cardbus so I can
use a PHS wireless card with NetBSD.) The USB mouse and floppy appear to
work fine; I can read stuff from the floppy drive, which is very cheerful.

cjs
-- 
Curt Sampson <cjs@cynic.net>  +81 3 5778 0123   de gustibus, aut bene aut nihil
	    "The chain which can be yanked is not the eternal chain."
			    -- G. Fitch

NetBSD 1.5X (GENERIC) #0: Wed Jul 25 14:27:31 PDT 2001
    matt@i8000.local:/u1/kobj/GENERIC
cpu0: GenuineTMx86  (586-class), 597.77 MHz
cpu0: features 80893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP>
cpu0: features 80893f<CMOV,MMX>
total memory = 110 MB
avail memory = 97772 KB
using 1446 buffers containing 5784 KB of memory
BIOS32 rev. 0 found at 0xfb5bb
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: unknown vendor 0x1279 product 0x0395 (rev. 0x01)
unknown vendor 0x1279 product 0x0396 (RAM memory) at pci0 dev 0 function 1 not configured
unknown vendor 0x1279 product 0x0397 (RAM memory) at pci0 dev 0 function 2 not configured
vga1 at pci0 dev 4 function 0: S3 Savage/IX+MV (rev. 0x13)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
Acer Labs product 0x5451 (audio multimedia, revision 0x01) at pci0 dev 6 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
fxp0 at pci0 dev 14 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:00:39:9d:43:99
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
Toshiba ToPIC100 CardBus-PCI Bridge (CardBus bridge, revision 0x32) at pci0 dev 18 function 0 not configured
ohci0 at pci0 dev 20 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask ebfd netmask effd ttymask ffff
ums0 at uhub0 port 1 configuration 1 interface 0
ums0: KYE USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: Y-E DATA FlashBuster-U, rev 1.10/3.12, addr 3
umass0: using UFI over CBI
atapibus0 at umass0 channel 0: 2 targets
sd0 at atapibus0 drive 0: <Y-E DATA, USB-FDU, 3.12> type 0 direct removable
sd0: drive offline
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0