I used dty02 because only with it works, but here is a short message when PC boots
up:
...
/netbsd com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
...

and there from pppd, when I run it with device /dev/dty02:

pppd: pppd using interface ppp0
pppd: connect ppp0 <-> /dev/dty02
pppd: Modem hangup

and it is repeated 8-10 times. tahts all, any sugestions ? I think com2 must have
irq4 ?

Sincerely,
Symka.


>
>use /dev/dty00 in NetBSD
> 

--
Symka