> WARNING: CYRIX 486DLC CACHE UNCHANGED.
> Don't want to go faster?

Sure, but that's rather impossible with this chip.

> man options and search CYRIX

I couldn't find CYRIX in my manual

> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com1 at isa0 port 0x2f8-0x2ff irq 5: ns16550a, working fifo

> Are you absolutely sure irqs are ok?

Yes, I'm, because I can adjust the IRQ settings using jumpers

> You have two serial ports. Is the second one a modem? 

I have bought a serial expension card, because I didn't have any serial
port. The second port is not a modem, it is another serial port.

> Are you _sure_ you're hooking the mouse up to tty00?

No, I'm not, so that's why I tried tty00 and tty01, but both didn't
work.

>   startx -- -probeonly 2>&1 >startx.log

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: December 20 1999
        If the server is older than 6-12 months, or if your card is
newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.4.3 The NetBSD Foundation, Inc.
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
      s3_savage, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
NM2200,
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
      Voodoo Banshee, Voodoo3, smi, generic
Using pcvt driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MouseSystems, device: /dev/tty00, buttons: 3
(**) SVGA: Graphics device ID: "Trident TGUI9440 (generic)"
(**) SVGA: Monitor ID: "Iiyama Vision Master 17"
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
<snip FontPath>
(--) Trident chipset version: 0xe3 (TGUI9440AGi)
(--) SVGA: Revision 0.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset:  tgui9440agi
(**) SVGA: videoram: 1024k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "800x600": mode clock =  69.650
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: Generic SpeedUps selected (Flags=0x30)
(--) SVGA: Using Graphics Engine.
(--) SVGA: Using 1024 byte display width.
X connection to :0.0 broken (explicit kill or server shutdown).