On Wed, 18 Oct 2000 11:02:27 +0100 (BST) 
 David Brownlee <abs@netbsd.org> wrote:

> 	Shouldn't that code fail the second attach with a diagnostic
> 	rather than panicing?

probably, changing the isa* to isa1 has worked around the problem
and it doesn't appear that I'm missing any devices I've attached the
probe info for the laptop whilst in the docking station for reference.
[Don't suppose anyone has an X Config for this machine ? :-)].

Cheers,
Neil.


NetBSD 1.5_ALPHA2 (DOOM) #1: Wed Oct 18 11:50:04 BST 2000
    neil@doom.noc.COLT.NET:/usr/src/sys/arch/i386/compile/DOOM
cpu0: Intel Pentium III (E) (686-class)
total memory = 127 MB
avail memory = 114 MB
using 1657 buffers containing 6628 KB of memory
BIOS32 rev. 0 found at 0xfc376
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage/MX+MV (rev. 0x11)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
pcib0 at pci0 dev 3 function 0
pcib0: Toshiba America Info Systems product 0x0611 (rev. 0x51)
pcib1 at pci0 dev 5 function 0
pcib1: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 5 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x0
1)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-220>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2302, 8000202919, 1315> type 5 cd
rom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 5 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 
0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revisio
n 0x03) at pci0 dev 5 function 3 not configured
AT&T Microelectronics LTMODEM (miscellaneous communications, revision 0x01) at p
ci0 dev 7 function 0 not configured
Toshiba America Info Systems product 0x0d01 (iRDA wireless) at pci0 dev 9 functi
on 0 not configured
Toshiba America Info Systems ToPIC100 CardBus-PCI Bridge (CardBus bridge, revisi
on 0x20) at pci0 dev 11 function 0 not configured
Toshiba America Info Systems ToPIC100 CardBus-PCI Bridge (CardBus bridge, revisi
on 0x20) at pci0 dev 11 function 1 not configured
Yamaha 744 (DS-1S) Audio (audio multimedia, revision 0x02) at pci0 dev 12 functi
on 0 not configured
ex0 at pci0 dev 15 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0
x6c)
ex0: interrupting at irq 11
ex0: MAC address 00:00:39:28:6e:26
ukphy0 at ex0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0017, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
isa at pcib1 not configured   **** NOTE ****
apm0 at mainbus0: Power Management spec V1.2
biomask ef6d netmask ef6d ttymask ffef
pcic0: controller 0 detecting irqs with mask 0xdeb8:..5..9..10
pcic0: using irq 5 for socket events
IPsec: Initialized Security Association Processing.
uhub1 at uhub0 port 2
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs