This is a multi-part message in MIME format.
--------------D109CFCB8433627304581FB2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Can anyone help me out here. I'm try to get everything working on my
(work) Omnibook 4150B, but I'm having a problem with the PCMCIA cards
specifically a Psion modem card. The problem manifests itself when I try
to do PPP on the card and I get "stray interrupt" messages.

Attached is the dmesg output from the kernel I got to after much
fiddling. The machine was booted without any cards in with the modem
card inserted first and then a network card (3c574B).

As part of the fiddling I tried using PCIC_ISA_INTR_ALLOC_MASK so that
irq 3 wasn't available, but that just changed the stray interrupt to
number 9.

Strangely the network card seems to work fine it just the damn modem
won't play ball.

Nick
--------------D109CFCB8433627304581FB2
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.txt"

NetBSD 1.5_ALPHA2 (GO61923) #1: Mon Aug 21 15:38:09 BST 2000
    root@go61923:/usr/NetBSD-current/cvs/syssrc/sys/arch/i386/compile/GO61923
cpu0: Intel Pentium III (E) (686-class)
total memory = 127 MB
avail memory = 114 MB
using 1657 buffers containing 6628 KB of memory
BIOS32 rev. 0 found at 0xfd790
PCI BIOS rev. 2.1 found at 0xfd9cb
PCI IRQ Routing Table rev. 1.0 found at 0xfdf50, size 144 bytes (7 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
pci_addr_fixup: 000:04:0 0x104c 0xac1c new address 0x08000000
pci_addr_fixup: 000:04:1 0x104c 0xac1c new address 0x08001000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Mach64 LM (rev. 0x64)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at pci0 dev 4 function 0 not configured
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at pci0 dev 4 function 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-212000>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 11513 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 23579136 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 not configured
ESS Technology Inc Maestro 2E PCI Audio Accelerator (audio multimedia, revision 0x10) at pci0 dev 8 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
apm0 at mainbus0: Power Management spec V1.2
biomask ef6d netmask ef6d ttymask ffef
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..5..9..11..15
pcic0: using irq 3 for socket events
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
com1 at pcmcia1 function 0 port 0x3e8-0x3ef: serial device
com1: ns16550a, working fifo
ep0 at pcmcia0 function 0 port 0x400-0x41f: 3Com 3c574-TX 10/100Mbps Ethernet
ep0: address 00:50:da:e4:80:3b, 64KB word-wide FIFO, 1:1 Rx:Tx split
tqphy0 at ep0 phy 0: 78Q2120 10/100 media interface, rev. 10
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcmcia1: card irq 5
stray interrupt 5


--------------D109CFCB8433627304581FB2--