On my nice new K6-2 500, in 1.4.2 and 1.5_ALPHA, i'm getting:

uvm_fault(0xc03ba918, 0xd4bbd000, 0, 1) -> 1
kernel: page fault trap, code=0
Stopped in cc at	_sys_access+0xd4:	movl	0xffffff98(%ebp),%edx
db> trace
uvm_fault(0xc03ba918, 0xd4bbd000, 0, 1) -> 1
kernel: page fault trap, code=0
Faulted in DDB; continuing

	sporadically, when compiling / ftping. Anything I should try short of
send-pr?
	Thanks

Gregory

> NetBSD 1.4.2 (GENERIC) #3: Wed Mar 15 23:41:54 PST 2000
>     toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: family 5 model 8 step c
> cpu0: AMD K6-2 (586-class)
> real mem  = 66650112
> avail mem = 58208256
> using 839 buffers containing 3436544 bytes of memory
> mainbus0 (root)
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o enabled, memory enabled
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
> ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3)
> PCI-AGP (rev. 0x00) pci1 at ppb0 bus 1
> pci1: i/o enabled, memory enabled
> vga1 at pci1 dev 0 function 0: 3Dfx Interactive product 0x0005 (rev. 0x01)
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0
> pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x47)
> pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586A IDE
> Controller pciide0: bus-master DMA support present
> pciide0: primary channel configured to compatibility mode
> atapibus0 at pciide0 channel 0
> cd0 at atapibus0 drive 1: <FX810T4, , a03> type 5 cdrom removable
> cd0: 32-bits data port
> cd0: drive supports PIO mode 3, DMA mode 1
> wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CX6.8A>
> wd0: drive supports 16-sector pio transfers, lba addressing
> wd0: 6532MB, 14158 cyl, 15 head, 63 sec, 512 bytes/sect x 13379310 sectors
> wd0: 32-bits data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> pciide0: primary channel interrupting at irq 14
> pciide0: secondary channel configured to compatibility mode
> wd1 at pciide0 channel 1 drive 0: <FUJITSU M1638TAU>
> wd1: drive supports 16-sector pio transfers, lba addressing
> wd1: 2452MB, 4982 cyl, 16 head, 63 sec, 512 bytes/sect x 5023680 sectors
> wd1: 32-bits data port
> wd1: drive supports PIO mode 4, DMA mode 2
> pciide0: secondary channel interrupting at irq 15
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
> transfers) cd0(pciide0:0:1): using PIO mode 3, DMA mode 1 (using DMA data
> transfers) wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data
> transfers) ppb1 at pci0 dev 7 function 3: VIA Technologies VT82C586
> (Apollo VP) Power Management Controller (rev. 0x10) ppb1: not configured
> by system firmware
> unknown vendor 0x12eb product 0x0003 (audio multimedia, revision 0x02) at
> pci0 dev 9 function 0 not configured ne2 at pci0 dev 10 function 0:
> RealTek 8029 Ethernet
> ne2: 10base2, 10baseT, 10baseT-FDX, auto, default auto
> ne2: Ethernet address 00:e0:29:46:18:83
> ne2: interrupting at irq 10
> isa0 at pcib0
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> lpt0 at isa0 port 0x378-0x37b irq 7
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> biomask c040 netmask c440 ttymask c4c2
> wscons: wskbd0 glued to wsdisplay0 (console)
> wd1: no disk label
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs