I think the driver support for the Adaptec was left out?
Sees the Adaptec but that is all?

Jeff Northon

    toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 5 model 4 step 3
cpu0: Intel Pentium/MMX (586-class)
real mem  = 133824512
avail mem = 120324096
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7100 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: device disabled (at device)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 7
function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x01) at pci0
dev 7 function 3 not configured
fxp0 at pci0 dev 13 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 15
fxp0: Ethernet address 00:90:27:cc:d0:04
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x1274 product 0x1371 (audio multimedia, revision 0x07) at pci0 dev
14 function 0 not configured
vendor 0x1002 product 0x4754 (VGA display, revision 0x41) at pci0 dev 15
function 0 not configured
vendor 0x9004 product 0x8778 (SCSI mass storage, revision 0x01) at pci0
dev 16 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: consolefdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 40 netmask 8040 ttymask 8042
md0: internal 1587K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs

=======================================================================

>Start shell (Utilities->Run /bin/sh) and look for "ahc" (controller)
>and "sd" SCSI disk devices in /kern/msgbuf.
>
>-- 
>Zdenek Salvet
>salvet@ics.muni.cz 
>Ustav vypocetni techniky Masarykovy univerzity, Brno
>tel.: ++420-5-41 512 257                           fax: ++420-5-41 212
>747
>----------------------------------------------------------------------------
>         God isn't dead, He's just trying to avoid the draft.