Just FYI:

On Mon, Oct 18, 1999 at 01:26:15PM +0200, Manuel Bouyer wrote:
> On Mon, Oct 18, 1999 at 01:44:11PM +0300, Jukka Marin wrote:
> > Short description: Argh!
> > 
> > Long one:
> > 
> > NetBSD 1.4.1 (KYYHKY) #0: Sat Oct 16 02:18:50 EEST 1999
> >     root@kyyhky:/store/s/NetBSD141/usr/src/sys/arch/i386/compile/KYYHKY
> > 
> > ncr0 at pci0 dev 8 function 0: ncr 53c810a fast10 scsi
> > ncr0: interrupting at irq 11
> > ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
> > ncr0: single-ended, open drain IRQ driver
> > ncr0: restart (scsi reset).
> > 
> > st1 at scsibus0 targ 4 lun 0: <HP, C1533A, A812> SCSI2 1/sequential removable
> > st1: st1(ncr0:4:0): 10.0 MB/s (100 ns, offset 8)
> > density code 0x24, variable blocks, write-enabled
> > 
> > Oct 18 13:40:32 kyyhky /netbsd: st1(ncr0:4:0):  Check Condition on CDB: 0x0a
> > 00 00 28 00 00
> > Oct 18 13:40:32 kyyhky /netbsd:     SENSE KEY:  Aborted Command
> > Oct 18 13:40:32 kyyhky /netbsd:      ASC/ASCQ:  Data Phase Error
> > Oct 18 13:40:32 kyyhky /netbsd: 
> > Oct 18 13:40:32 kyyhky /netbsd: st1(ncr0:4:0):  Check Condition on CDB: 0x0a
> > 00 00 28 00 00
> > Oct 18 13:40:32 kyyhky /netbsd:     SENSE KEY:  Aborted Command
> > Oct 18 13:40:32 kyyhky /netbsd:      ASC/ASCQ:  Data Phase Error
> > Oct 18 13:40:32 kyyhky /netbsd: 

I've been running NetBSD-release for about a month now and the ncr driver
has been working perfectly.  Maybe it's luck, maybe the bug affecting my
system has been fixed.. :-)

  -jm