Hi Folks,
	I have a Pentium 233Mhz on an AN430TX motherboard
It has a hardrive on the primary master, a CDR on the
secondary master and a ZIP 100 on the secondary slave.
I include the boottime dmesg below.

The Zip 100 isn't probing.  Are there any known problems
with zips probing under 1.4.1?  Anything I can check/try
to get it to probe?

	Thanks.

	- Scott


% /sbin/dmesg
NetBSD 1.4.1 (GENERIC) #1: Tue Aug 10 00:03:09 MEST 1999
    fvdl@struis:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 5 model 4 step 3
cpu0: Intel Pentium/MMX (586-class)
real mem  = 133824512
avail mem = 120582144
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439TX System Controller (MTXC) (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST33232A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3077MB, 6253 cyl, 16 head, 63 sec, 512 bytes/sect x 6303024 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <HITACHI CDR-8330, , 0007> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 9
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 13 function 0: Nvidia Corporation product 0x0008 (rev. 0x03)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
Nvidia Corporation product 0x0009 (miscellaneous multimedia, revision 0x03) at pci0 dev 13 function 1 not configured
fxp0 at pci0 dev 14 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:a0:c9:75:a0:56
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opmsprobe: command error
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
ym0 at isapnp0 port 0x220/16,0x530/8,0x388/8,0x330/2,0x370/2 irq 5 drq 0,1
ym0: OPL3-SA3 Snd System : OPL3-SA3
audio0 at ym0: full duplex
joy0 at isapnp0 port 0x201/1
joy0: OPL3-SA3 Snd System 
joy0: joystick not connected
biomask c240 netmask c640 ttymask c6c2
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs